Opentherm - Error Codes

Post Reply
ianmen
Posts: 7
Joined: 16 Mar 2020, 10:17

Opentherm - Error Codes

Post by ianmen »

Hi,


Sometimes my boiler is not working properly ( there is not enough water pressure, no gas, not enough flow, etc.). On my old thermostat I could see an error code e.g.; 63 - No flow. If the boiler was in an error mode/code.

Is there any option to display the error codes from the opentherm protocol in the mobile app?

Kind regards,
Post Reply

Return to “Home+Control iOS/Android Application”