Bricked my Welcome? HID Device via usb??

Tips, tricks and frequently asked questions
Post Reply
KirenPollard
Posts: 1
Joined: 04 Oct 2021, 08:56

Bricked my Welcome? HID Device via usb??

Post by KirenPollard »

hope someone can help me with this one.
Today i had to interrupt power to my welcome camera and now it is not connecting/responding anymore.
The following happens after plugging the (original) usb power supply in:
- Green LED goes on for about 15 seconds
- green LED flashes once
- stays on for another 2 secodns
- then red LED goes on and stays on forever

Ethernet links comes up after powering on, but no data is transferred.
Wifi connection never comes up.

What i tried so far:
- Connecting to the Camera via the App does not work, the camera is never found.
- using a different powr supply does not change anything
- use a different / no SD Card during boot.
- Connect via USB to my PC. LED never turns white, Netatmo Wizard gives me error 2/2 (=1?) and is unable to connect. Interestingly the camera is detected as an USB HID Device (VID 25DA, PID 0004)

Any advice what could have happened and how to fix this?
Thanks in advance
Post Reply

Return to “General questions”