Extra outdoor module

Suggestions, features and new ideas
Duracell
Posts: 7
Joined: 09 Dec 2015, 17:45

Re: Extra outdoor module

Post by Duracell » 08 Nov 2017, 21:46

Is there anything known about an extra outdoor module? I measure the temp at 1.50 m height and would like to measure the temp also at 10 cm height

Sero
Posts: 3
Joined: 18 Nov 2017, 18:31

Re: Extra outdoor module

Post by Sero » 18 Nov 2017, 18:33

I also support this request.

stanikuz
Posts: 77
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Extra outdoor module

Post by stanikuz » 20 Nov 2017, 23:02

It is good idea to support additional external module. Currently Netatmo offers to buy external module, but for what? For there who lost or broke external module from original Weather Station pack?
I suppose it would be good for the customers and Netatmo too to support 2 (or even more?) external modules to conquer sun influence to measures.
Stan Kuznetsov
Weather: 2x Weather Stations + 6x Indoor Modules + 2x Rain + 2x Wind Gauges + 1x Home Coach
Security: 2x Welcome + 2x Presence Cameras + 3x Smoke Alarms + 3x Door/Window Sensors
Energy: 4x Smart Valves with Relay + 1x Thermostat with Relay

Mellberg
Posts: 1
Joined: 26 Jan 2019, 08:29

Re: Extra outdoor module

Post by Mellberg » 26 Jan 2019, 08:37

I'm currently not a user of any Netatmo products, but was about to buy the weather station with additional sensors. The limitation of a single outdoor sensor stopped me from buying it.

In my case, I wanted to add an additional outdoor sensor for measuring the humidity and temperature in my suspended foundation of the house (below the house), where I suspect that the temperature could be below zero during winter here in Sweden. Then I also wanted a sensor for inside my garage.


So, please Netatmo, add support for multiple outdoor sensors!

stanikuz
Posts: 77
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Extra outdoor module

Post by stanikuz » 26 Jan 2019, 13:03

Mellberg wrote:I'm currently not a user of any Netatmo products, but was about to buy the weather station with additional sensors. The limitation of a single outdoor sensor stopped me from buying it.

In my case, I wanted to add an additional outdoor sensor for measuring the humidity and temperature in my suspended foundation of the house (below the house), where I suspect that the temperature could be below zero during winter here in Sweden. Then I also wanted a sensor for inside my garage.


So, please Netatmo, add support for multiple outdoor sensors!
In your case there is no problem for this: you can use additional indoor module(s). But it have limitation for 3 additional indoor modules as maximum. They can measure temperatures below 0°C also.
Stan Kuznetsov
Weather: 2x Weather Stations + 6x Indoor Modules + 2x Rain + 2x Wind Gauges + 1x Home Coach
Security: 2x Welcome + 2x Presence Cameras + 3x Smoke Alarms + 3x Door/Window Sensors
Energy: 4x Smart Valves with Relay + 1x Thermostat with Relay

Chiara_Netatmo
Posts: 161
Joined: 15 Jun 2017, 13:54

Re: Extra outdoor module

Post by Chiara_Netatmo » 07 Feb 2019, 12:28

Hello,

We do not recommend to use the additional indoor module outside, as it is intended for indoor use only and an exposition to extreme temperature and humidity conditions could damage it.

Have a nice day

Mr.SanderZ
Posts: 113
Joined: 03 Jan 2017, 16:32
Location: Utrecht, NL
Contact:

Re: Extra outdoor module

Post by Mr.SanderZ » 07 Aug 2020, 12:00

+1 on possibility to buy an additional outdoor module.
Home: Smart Outdoor Camera, Smart Home Weather Station, Smart Thermostat, and Smart Video Doorbell. Waiting for the smart lock.

Post Reply

Return to “Feature requests”