I noticed that the image of one of my presence cameras at night suddenly was very dark.
The "purple" IR-lights are not working anymore. The camera still switches to "dark mode" with grey image when it gets dark and the floodlight still works.
The camera is out of warranty.. other people that had this issue? Any ideas if this is fixable? I do not want to buy a completely new unit..
IR light not working/floodlight still works - dark image at night
-
- Posts: 25
- Joined: 16 May 2019, 09:59
Re: IR light not working/floodlight still works - dark image at night
Hi,
Edit: Forget my question, I now read the subject where you wrote "floodlight still works"
Edit: Forget my question, I now read the subject where you wrote "floodlight still works"
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
-
- Posts: 25
- Joined: 16 May 2019, 09:59
Re: IR light not working/floodlight still works - dark image at night
You can also see this:
But the LED light/IR light area looks strange at the bottom.
Could it be moisture/dirt? Looks like it around the camera lens in the corners.But the LED light/IR light area looks strange at the bottom.