SD Card stuck -- moved too far inside post reinsert

Tips, tricks and frequently asked questions
Post Reply
HurdyGurdy
Posts: 43
Joined: 06 Nov 2017, 00:18

SD Card stuck -- moved too far inside post reinsert

Post by HurdyGurdy »

Had the dreaded SD CARD defective message so decided to remove SD card to give it a clean. When i reinserted it, the card did not lock in place but completely moved into the inside of the slot.
Impossible to get out now as it moved too deep inside. How can netatmo build a camera where that is even possible ?

Has anyone experienced this before - any tips on resolving ?
jofre_netatmo
Posts: 828
Joined: 18 Jun 2014, 15:09

Re: SD Card stuck -- moved too far inside post reinsert

Post by jofre_netatmo »

Hello, please get in contact with our Support Team so we can help you with this issue.
Thanks,
Jofre - Netatmo Team
Owenlars
Posts: 60
Joined: 16 Jan 2017, 15:49

Re: SD Card stuck -- moved too far inside post reins

Post by Owenlars »

You have probably fixed this by now but I also did this and was told to push the SD card through the slot where it duly appeared, fell out of the slot, I tipped it out the camera and reinserted it correctly. Everything then worked perfectly.
Post Reply

Return to “General questions”