Presence firmware 179

Tips, tricks and frequently asked questions
Post Reply
fastzapper
Posts: 15
Joined: 03 Oct 2017, 10:28

Presence firmware 179

Post by fastzapper » 09 Apr 2020, 08:09

what can I do that my 2nd presence also updates to firmware 179 (now 175)?
Thanks Markus

Mark@BC
Posts: 3
Joined: 15 Nov 2019, 21:32

Re: Presence firmware 179

Post by Mark@BC » 09 Apr 2020, 21:12

Be patient 😉

chusym
Posts: 2
Joined: 19 May 2020, 02:47

Re: Presence firmware 179

Post by chusym » 19 May 2020, 02:57

My presence is still on firmware 175, even though there has been two updates since then (179 and 184).
In my camera log I can see few upgrade attempts where I get "downloading update" and then a few minutes later "download failed". This has happened twice on Monday and I have seen it a couple of times before too.
I don't think it is an Internet issue. What might cause the download to fail?
Is there any way to manually update the firmware?

Ekristoffe
Posts: 59
Joined: 15 Apr 2020, 08:32

Re: Presence firmware 179

Post by Ekristoffe » 19 May 2020, 13:42

using the USB and the setting app on windows and mac (it work for weather)

frav
Posts: 45
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Presence firmware 179

Post by frav » 19 May 2020, 19:52

Erikstoffe, there is no USB connection on the Presence cameras. It is only OTA updates that are available.
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
6x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)

Ekristoffe
Posts: 59
Joined: 15 Apr 2020, 08:32

Re: Presence firmware 179

Post by Ekristoffe » 20 May 2020, 10:59

interesting. can you set the wifi access point from the app ?
if yes could you try to set again the wifi settings ?

chusym
Posts: 2
Joined: 19 May 2020, 02:47

Re: Presence firmware 179

Post by chusym » 25 May 2020, 01:32

It can access the Presence via WiFi reliably via the web console and the camera uploads to my Dropbox etc.
It only seems to timeout on the firmware updates.

Post Reply

Return to “General questions”