Firmware 3.5.1

Tips, tricks and frequently asked questions
frav
Posts: 72
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Firmware 3.5.1

Post by frav »

Anyone got the: v3.10.0 (May 24th, 2022) ?

https://forum.netatmo.com/viewtopic.php?f=42&t=7283
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
ob-y
Posts: 7
Joined: 20 Jan 2017, 13:34

Re: Firmware 3.5.1

Post by ob-y »

frav wrote: 29 May 2022, 07:57 Anyone got the: v3.10.0 (May 24th, 2022) ?
Yes, updated on May 25th from 3.2.3 to 3.10, all fine, hksv works again!
Tha_Matt_Man
Posts: 25
Joined: 16 May 2019, 09:59

Re: Firmware 3.5.1

Post by Tha_Matt_Man »

Is 3.5.3 also getting 3.10.0?

My camera's are on 3.5.3 pushed by Netatmo support because of the bad detection some time ago.

Did not receive any update yet.
frav
Posts: 72
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Firmware 3.5.1

Post by frav »

My cameras are still on 3.2.3 , so I'm waiting too...
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
RichDUK
Posts: 4
Joined: 09 Jul 2020, 13:22

Re: Firmware 3.5.1

Post by RichDUK »

This may be pure coincidence, but I hadn’t received the update either, so I opened the Netamo Security App on my iPad this afternoon and left it open, my camera updated about an hour or so later. As I say, could be pure coincidence.
frav
Posts: 72
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Firmware 3.5.1

Post by frav »

Yesterday two of my Presence cameras got updated to 3.10.0
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
Tha_Matt_Man
Posts: 25
Joined: 16 May 2019, 09:59

Re: Firmware 3.5.1

Post by Tha_Matt_Man »

So I don't think 3.5.3 is getting the update because still nothing ...

So the "special" firmware pushed by Netatmo support will not get any updates?
Post Reply

Return to “General questions”