Just received 3.5.1 and still no updated changelog in the sticky thread in this forum…
Why doesn't Netatmo inform their users what's new? It will take ages to solve problems if we don't know what Netatmo has done in the different versions. Also support will recieve unecesarry emails.
Firmware 3.5.1
Re: Firmware 3.5.1
I have received 3.5.1 as well, but I have contacted the support today, to report the bad detection in 3.2.0... I thought I have received 3.5.1 because I have contacted them
-
- Posts: 25
- Joined: 16 May 2019, 09:59
Re: Firmware 3.5.1
Also received 3.5.1 today on all my Presence cameras..
Re: Firmware 3.5.1
Netatmo, please update my camera…
Relay: 70:ee:50:0c:07:70
Thermostat: 04:00:00:0c:2c:04
Valve: 09:00:00:00:c7:dc
Valve: 09:00:00:00:c8:76
Valve: 09:00:00:00:fe:40
Valve: 09:00:00:00:fe:43
Presence: 70:ee:50:26:f7:54
Thermostat: 04:00:00:0c:2c:04
Valve: 09:00:00:00:c7:dc
Valve: 09:00:00:00:c8:76
Valve: 09:00:00:00:fe:40
Valve: 09:00:00:00:fe:43
Presence: 70:ee:50:26:f7:54
Re: Firmware 3.5.1
My presence was updated to 3.5.1 Netatmo App now works fine but in homekit no timeline and no recordings
Re: Firmware 3.5.1
Recived 3.5.1 today after contacting Support.
Seems to work as expected again.
Seems to work as expected again.
Re: Firmware 3.5.1
3.5.0 seemed good, 3.5.1 I find detections are way slower, not sure why it takes longer to start recording but it is noticeable.
Re: Firmware 3.5.1
Hi,
I still have f/w 3.2.3 in my Presence cameras. And the detection misses alot of human movements.
How have you got the latest f/w, like 3.5.1 or newer? Only by contacting the support to get it pushed to you cameras?
I still have f/w 3.2.3 in my Presence cameras. And the detection misses alot of human movements.
How have you got the latest f/w, like 3.5.1 or newer? Only by contacting the support to get it pushed to you cameras?
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
-
- Posts: 4
- Joined: 08 Nov 2021, 04:26
Re: Firmware 3.5.1
I'm on 3.2.3 too. Is there a way to force the update?