API does not return min and max

The Netatmo API is a set of webservices allowing developers and third parties to access Netatmo device's data.
Post Reply
Rainman43CZ
Posts: 3
Joined: 20 Jun 2018, 21:51

API does not return min and max

Post by Rainman43CZ »

Hello Gentleman,

there is no value min/max temperature and date min/max temperature from executed command /Getstationdata.
I found if I put some other station in to favorite station and set get_favorites then min/max value is shown. See attached print screen.

Any idea where could be issue?

Thank You for your help
BR /Václav
Attachments
get_favorites 1.PNG
get_favorites 1.PNG (13.31 KiB) Viewed 1051 times
get_favorites 0.PNG
get_favorites 0.PNG (9.88 KiB) Viewed 1051 times
Leslie
Posts: 111
Joined: 12 Feb 2020, 11:07

Re: API does not return min and max

Post by Leslie »

Hello,

On my side, I correctly receive min/max_temp + date_min/max_temp via Postman and the Try It
Are you using a correct token ? With read_station as scope ?

Have a good day,
Leslie - Community Manager
Rainman43CZ
Posts: 3
Joined: 20 Jun 2018, 21:51

Re: API does not return min and max

Post by Rainman43CZ »

Hello Leslie,

thank you for your feedback.
Yes I am using a correct token and with /getstationsdata

I do not get min/max values also via test page. it is read as scope/read_station.
https://dev.netatmo.com/apidocumentatio ... getmeasure

So there is probably problem in my profile.
Could you check it please?

Thanks
Kind Regards / Václav
Leslie
Posts: 111
Joined: 12 Feb 2020, 11:07

Re: API does not return min and max

Post by Leslie »

Hello Václav,

Strange, I didn't achieve to reproduce the issue
Can you please use our contact form "I need help with the Netatmo API" (https://dev.netatmo.com/contact-us-form) and provide me with :
- The MAC Address of your gateway
- the list of the scopes you are using
- The exact URL of your call

I'll then be able to investigate more

Have a good day,
Leslie - Community Manager
Post Reply

Return to “Netatmo API”