Energy API

The Netatmo API is a set of webservices allowing developers and third parties to access Netatmo device's data.
Post Reply
Thibautg16
Posts: 2
Joined: 10 Mar 2018, 23:36

Energy API

Post by Thibautg16 » 10 Mar 2018, 23:46

Hi,

In this page you can see the following possible modes for setpoint_mode (manual, max, off, shedule, away or hg) :
https://dev.netatmo.com/resources/techn ... homestatus

But it seems that the only modes we can define are (schedule, away or hg) with thermostat :
https://dev.netatmo.com/resources/techn ... tthermmode

And only "manual" or "home" mode with room :
https://dev.netatmo.com/resources/techn ... thermpoint

How can I use max and off please ?

Thanks,
Thibaut

Céline
Posts: 37
Joined: 20 Nov 2017, 18:17

Re: Energy API

Post by Céline » 12 Mar 2018, 14:53

Hello Thibaut,

The modes max and off can be used with setroomthermpoint but only in the room where the thermostat is.
We'll change the doc accordingly,

Thanks,
Céline - Netatmo Team :D

Thibautg16
Posts: 2
Joined: 10 Mar 2018, 23:36

Re: Energy API

Post by Thibautg16 » 23 Apr 2018, 14:45

Hello Celine,

Thanks for informations.

I am now looking for information about the power "rf_strength" and "wifi_strength".

In my case, wired relay, what does "rf_strength" mean? It's between the relay and what other equipment?

Thanks,
Thibaut

Post Reply

Return to “Netatmo API”