thermostat/valves : getmeasure returns wrong data...

The Netatmo API is a set of webservices allowing developers and third parties to access Netatmo device's data.
Post Reply
jc999
Posts: 92
Joined: 26 Nov 2014, 11:49
Location: Bruxelles

thermostat/valves : getmeasure returns wrong data...

Post by jc999 » 14 Sep 2017, 09:21

Hi,

Am i the only one who get invalid temperature data via getmeasure on few valves ?
netatmo website shows an almost flat line around 22* , and for a couple of valves, getmeasure returns some crazy temp as high
as 28° ... this, when the room is heated...
Data from the netatmo web site:
web_temp.jpg
web_temp.jpg (27.65 KiB) Viewed 525 times
Data returned by getmeasure:
high_temp.jpg
values returned by getmeasure on that room
high_temp.jpg (19.74 KiB) Viewed 525 times
others are ok...

jc999
Posts: 92
Joined: 26 Nov 2014, 11:49
Location: Bruxelles

Re: thermostat/valves : getmeasure returns wrong data...

Post by jc999 » 14 Sep 2017, 10:09

Another example (check the red line "Cuisine") :
From the netatmo web site:
cuisine_web.jpg
cuisine_web.jpg (21.99 KiB) Viewed 516 times
From the API ( getmeasure ):
cuisine_high.jpg
cuisine_high.jpg (15.01 KiB) Viewed 516 times

Brieuc_Netatmo
Posts: 2952
Joined: 02 Jan 2014, 11:20

Re: thermostat/valves : getmeasure returns wrong data...

Post by Brieuc_Netatmo » 14 Sep 2017, 16:13

Hi,
The API for the Valves is not yet 100% working. I suggest not using it yet.
In your situation, the temperature collected is the temperature measured by one of the Valve sensor, whereas it should be the temperature of the room estimated by both sensors of the Valve.
We will make an announcement as soon as the API for Valves is ready.
Brieuc - Netatmo Team

jc999
Posts: 92
Joined: 26 Nov 2014, 11:49
Location: Bruxelles

Re: thermostat/valves : getmeasure returns wrong data...

Post by jc999 » 15 Sep 2017, 07:37

okay, thanks for the info.
btw, I am not able to connect this morning to the api, hopefully you didn't get the service down until the announcement ;-)

Post Reply

Return to “Netatmo API”