Fix modules.

Remarks, questions, tips and tricks regarding the Netatmo iPhone application.
Post Reply
sastil
Posts: 6
Joined: 22 Feb 2016, 15:56
Contact:

Fix modules.

Post by sastil »

I kindly wanted to ask you how to put the modules in the Weather Station V2 detection order in order of preference ;) or, in the various scrolling pages from right to left, in the iOS app, first display one module / room, instead of another. :|
Home:
Weather Station (Version2 + Rain Gauge + Wind Gauge + 3 additional Indoor Modules)
Healthy Home Coach
Thermostat + Relais (1st Generation)
Welcome

Garage:
Presence
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Fix modules.

Post by GEORGzer »

You need to download the „modules manager“ on your computer and connect the weather station via USB. Then remove all the modules and add them in the preferred order.

Maybe it works with the app as well, I‘ve never tried that before.
But the key is that you have to remove and re-add the modules, since sorting them is not an option, sadly.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
sastil
Posts: 6
Joined: 22 Feb 2016, 15:56
Contact:

Re: Fix modules.

Post by sastil »

GEORGzer wrote: 24 Dec 2019, 11:47
Thanks :)
Home:
Weather Station (Version2 + Rain Gauge + Wind Gauge + 3 additional Indoor Modules)
Healthy Home Coach
Thermostat + Relais (1st Generation)
Welcome

Garage:
Presence
vojta66
Posts: 369
Joined: 21 Jan 2016, 11:56
Contact:

Re: Fix modules.

Post by vojta66 »

Thanks as well, did not know that! Quite complicated procedure anyway...
1Welcome(512), 9 tags (v58), 1Smart Smoke (v108),1Smart Siren (v209)
1 Weather Station(v181), Outdoor module (50),Rain Gauge(v12),Wind Gauge(v25),3 Indoor Modules (v51)
1Thermostat(v75+relay 2nd generation v222 + 5Valves (v85)
2Presence cameras(320)
Post Reply

Return to “Weather Station iOS Application”