Page 1 of 8

Feature requests for the iPhone / iPad App

Posted: 28 Oct 2012, 11:39
by dvb-projekt
I want to start this thread for feature requests of the iPhone / iPad app.

Re: Feature requests for the iPhone / iPad App

Posted: 28 Oct 2012, 11:43
by dvb-projekt
Let me start with my 1st freature request:

It would be cool if we could scroll up and down through the single recorded data in the landscape mod.
ATM it is a bit intricately with the upper right button.

Re: Feature requests for the iPhone / iPad App

Posted: 31 Oct 2012, 23:39
by x-bartman-x
Hi!

After my first hours of testing, I miss the feature to reset the min/max values. Are these values reseted automaticly? If so, when?

It would also be nice if we can adjust the axis-scale of the diagrams. Which time period of the recorded data is available in the ipad app?

Re: Feature requests for the iPhone / iPad App

Posted: 01 Nov 2012, 13:01
by x-bartman-x
I would also be happy if there is a posibillity to show more than one curve on one graph. For example: outside humidity and temperture at the same time...

Thanks!
Toby

Re: Feature requests for the iPhone / iPad App

Posted: 01 Nov 2012, 18:58
by fpotter
Thanks for the suggestions. We will discuss them internally !

fred

Re: Feature requests for the iPhone / iPad App

Posted: 04 Nov 2012, 13:15
by mla
I would like to be able to set my own notification thresholds and/or to switch certain notifications on or off. Should be simply possible at the server side, it seems to me.

Re: Feature requests for the iPhone / iPad App

Posted: 04 Nov 2012, 14:34
by acarodp
Hi,
I second the "multiple curves in a plot" as well as the "set my own / change notification threshold" suggestions. It could also be cool to show the notification thresholds in the graphs for the ones where it makes sense, e.g. a red horizontal lines at 1000 ppm CO2... if this does not clutter the interface too much: I love the fact that now it is very clean and easy to read.

On a different note: I think it would be better if I were NOT allowed to see the MAC address of the stations I am invited to. It might be a bit paranoid, perhaps, but locking access only to specific MACs is one of the way of securing a WIFI, as you well know: the fact anybody can see the MAC of a device authorized to access your WIFI the moment you share your station on FB does not seem like a good idea. Plus, I don't see which use might be to anybody to see the MAC of a station he does not own...

Thanks

Re: Feature requests for the iPhone / iPad App

Posted: 16 Nov 2012, 00:47
by filmproduktion
Hi,

i bought the netatmo and it is great. I love it and hope there will be coming a lot more functions in the ios apps in the future.

Some things i am missing:

Get actual data everytime by pressing a refresh knob in the app.
Realtime data, with possibility to switch on and off, for saving battery power
Not only 5 minutes refresh interval! Better would be to switch it, e.g. between 1 minute, 3 minutes, 5 minutes, 10 minutes
More informative symbols for the weather. The actual symbols are very stylish but not so informative. Perhaps the ability, to switch between several symbol sets.
Thank you very much and best regards!

Re: Feature requests for the iPhone / iPad App

Posted: 22 Nov 2012, 10:38
by EricB
I'm using a wallmounted iPod touch to display the Netatmo data. The app is always active. It would be nice if it would update the data by itself without interaction.

Thanks

Re: Feature requests for the iPhone / iPad App

Posted: 26 Nov 2012, 22:06
by fpotter
Change notification threshold is been developped.....

Will be there in firmware 65 to be released within two weeks...

thanks for your patience !

fred