The new app/web page showed a new option about the temperature correction, Cold and Warm values, but in my setup warm value doesn't work as expected.
Whatever the value I'll put in the "Warm" section , it'll no provide any "update" on the temperature showed by the valve.
Is it just a fault in my valve/setup ?
New app (warm)temperature correction fail
-
- Posts: 7
- Joined: 17 Dec 2017, 22:44
Re: New app (warm)temperature correction fail
Same problem here
1 relais : 161
1 thermostat : 64
6 vannes : 50
1 thermostat : 64
6 vannes : 50
-
- Posts: 3089
- Joined: 02 Jan 2014, 11:20
Re: New app (warm)temperature correction fail
Hi,
Please note that the "warm radiator" setting can take up to 24H to be taken into account.
We will add a short sentence in the description to mention that, thank you for having reported this issue.
Please note that the "warm radiator" setting can take up to 24H to be taken into account.
We will add a short sentence in the description to mention that, thank you for having reported this issue.
Brieuc - Netatmo Team
Re: New app (warm)temperature correction fail
I would like to suggest the following on this subject.
Wouldn't it be possible to use the internal temperature from an existing internal temperature sensor of a netatmo weather station as the actual temperature for the valves?
I think an external temperature sensor further away from the radiator would make it much more accurate to measure the room temperature.
Wouldn't it be possible to use the internal temperature from an existing internal temperature sensor of a netatmo weather station as the actual temperature for the valves?
I think an external temperature sensor further away from the radiator would make it much more accurate to measure the room temperature.
-
- Posts: 30
- Joined: 29 Oct 2017, 08:10
Re: New app (warm)temperature correction fail
+1
Relais: 70:ee:50:0e:97:fe
Weather Station Main Modul: 70:ee:50:6b:1d:9a
Weather Station Main Modul: 70:ee:50:6b:1d:9a
Re: New app (warm)temperature correction fail
I tried to setup the valves thermometer as shown on the netatmo weather station value, but it doesn’t follow accurately the sensor.. so it would be a good Idea sync the valve room sensor with the weather station sensor where provided in the room.