Open Window detection

bacikb
Posts: 4
Joined: 08 Nov 2018, 23:45

Re: Open Window detection

Post by bacikb » 11 Jan 2019, 08:17

Jesper_privat wrote:
bacikb wrote:I bought a Xiaomi Aqara Window Sensor (10$, works with Apple Homekit), set-up an automation and turns-off a valve as soon as a window is opened...
This is how it works:

Hi, just a question

Does it work individually, so that if I as an example buy 3 sensors then it only stops heating in the room where the window is open, but keeps heating in other rooms?
You can set any rule you want, e.g stop heating only in the room where the window is open or stop heating also in the other rooms.

Jesper_privat
Posts: 4
Joined: 08 Jan 2019, 16:56

Re: Open Window detection

Post by Jesper_privat » 11 Jan 2019, 10:41

Thanks, I bought an Rigali Eve sensor, and it works.. My only problem is that:

1. When i open the door in the living room, then the two thermostats shuts off ad expected an turs on again when i shut the door (fine)
2. But if the door is open at forexample between 0800 0900 and I have scedulet heating to change at 08.30, then it will start even though the door is stille open :-/

Ssglackey
Posts: 4
Joined: 08 Feb 2019, 13:53

Re: Open Window detection

Post by Ssglackey » 08 Feb 2019, 14:03

And what is this?

How does the open window sensor work?
Detection of open windows only works if:

The installation was done using Netatmo valves (with internal software with a version later than 78).
The Netatmo valves are heating up.

Source
netatmo.com/en-gb/helpcenter/energy/3/how-does-the-open-window-sensor-work/340

I have FW73, in the article FW78 is mentioned. Newest FW is still 73.

Netatmo, if you won't enable open window detection by the end of March 2019 latest, I will contact EU authorities as you are selling product without advertised functions, so it will most probably be classified as false advertising, resulting with fine. My patience waiting over a year has ended.

Brieuc_Netatmo
Posts: 2926
Joined: 02 Jan 2014, 11:20

Re: Open Window detection

Post by Brieuc_Netatmo » 14 Feb 2019, 10:42

Hello everyone,
If you're interested to try before anyone else the new firmware which includes the Open Window Detection feature, please post here the serial number of the Relay to which your Valves are paired.
Have a lovely day!
Brieuc - Netatmo Team

lucaper88
Posts: 3
Joined: 14 Feb 2019, 14:53

Re: Open Window detection

Post by lucaper88 » 14 Feb 2019, 14:56

70:ee:50:0d:91:14
(i have 7 valves, 1 thermostat, 1 Relè)

mhaga
Posts: 32
Joined: 07 Dec 2017, 10:08

Re: Open Window detection

Post by mhaga » 14 Feb 2019, 19:05

Hi Brieuc,

Feel free to upgrade my relay and valves. Finally, OWD! Looking forward to this.
Relay serial: g0e8330 / 70:ee:50:0e:83:30

BR
/mhaga

Tommaso Florino
Posts: 34
Joined: 19 Jan 2018, 17:48

Re: Open Window detection

Post by Tommaso Florino » 14 Feb 2019, 22:01

hello 70:ee:50:0e:c2:c6
Id like to test the new functionality
thanks
tommaso

Ssglackey
Posts: 4
Joined: 08 Feb 2019, 13:53

Re: Open Window detection

Post by Ssglackey » 15 Feb 2019, 09:34

70:ee:50:0e:6c:9a

rebelo
Posts: 13
Joined: 11 Oct 2017, 15:24

Re: Open Window detection

Post by rebelo » 15 Feb 2019, 10:07

g0bfca6

Also willing to try it.

Tks
Rebelo

digi303
Posts: 12
Joined: 10 Dec 2018, 09:37

Re: Open Window detection

Post by digi303 » 15 Feb 2019, 15:11

I must try this.

Relais: 70:EE:50:0B:D7:28

5 valves

Thank you

Post Reply

Return to “General questions”