[REQUEST] v51 does not fix heating beyond requested

Post Reply
Davide83
Posts: 2
Joined: 21 Feb 2018, 09:42

[REQUEST] v51 does not fix heating beyond requested

Post by Davide83 » 21 Feb 2018, 09:53

Hello,
I need to point out that the latest upgrade (v51) on radiator valves does not solve the issue of overheating beyond command.
As shown in the pictures attached, I have the v51 on my valve but I keep facing the overheating problem (and not rarely, at least once a week). The graph represents the heating of yesterday.
Please check again the issue.
Thanks.

Best regards
Attachments
Screenshot_20180221-092100.png
Version 51
Screenshot_20180221-092117.png
Overheating

Davide83
Posts: 2
Joined: 21 Feb 2018, 09:42

Re: [REQUEST] v51 does not fix heating beyond requested

Post by Davide83 » 27 Feb 2018, 12:55

It is happening almost everyday.
I am losing my money. The device is not only useless, it is burning money....

whnagel
Posts: 88
Joined: 24 Nov 2014, 14:00

Re: [REQUEST] v51 does not fix heating beyond requested

Post by whnagel » 27 Feb 2018, 14:38

Overheating each day more than 8 degree!!!!!!!!!
18B88205-803E-4A3A-8002-6FD0F1EC8402.png

BalooDK
Posts: 9
Joined: 08 Mar 2018, 21:02

Re: [REQUEST] v51 does not fix heating beyond requested

Post by BalooDK » 08 Mar 2018, 21:04

whnagel wrote:Overheating each day more than 8 degree!!!!!!!!!
18B88205-803E-4A3A-8002-6FD0F1EC8402.png
But that valve is not heating !!!
Must be heat from another room

mdillmann
Posts: 60
Joined: 15 Oct 2017, 13:51

Re: [REQUEST] v51 does not fix heating beyond requested

Post by mdillmann » 08 Mar 2018, 22:47

It says and thinks it is not heating ... but in fact it was not able to fully close the real valve by putting preasure on that regulating pin ....

This is the main culprit ...
Relais: 70: ee: 50: 0e: 92: 3e (v197)
Ventile: o00a4a1 o00ac0b o00854d o006c0b(did go bananas) o007a51 o01cf3f (v73)

Max B
Posts: 7
Joined: 24 Dec 2017, 17:35

Re: [REQUEST] v51 does not fix heating beyond requested

Post by Max B » 12 Mar 2018, 09:49

Same here firmware 51 does not solve the issue, valves stay open, even if they "think" they are closed.

Post Reply

Return to “General questions”