Suggestion: use Netatmo Weather Station temperatures

tuxbox
Posts: 45
Joined: 07 Oct 2014, 08:45

Re: Suggestion: use Netatmo Weather Station temperatures

Post by tuxbox » 04 Oct 2018, 00:20

+1

vojta66
Posts: 288
Joined: 21 Jan 2016, 11:56
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by vojta66 » 04 Oct 2018, 09:51

@stanikuz - Exactly, well written. Cannot be better explained.

Hey Netatmo, PLEASE LISTEN and implement this.
1Welcome(v415), 9 tags (v57), 1Smart Smoke (v108),1Smart Siren (v107)
1 Weather Station(v162), Outdoor module (48),Rain Gauge(v11) Wind Gauge(v24),3 Indoor Modules (v46)
1Thermostat(v72+relay 2nd generation (v210) + 5Valves (v81)
2Presence cameras(v155)

Brieuc_Netatmo
Posts: 2936
Joined: 02 Jan 2014, 11:20

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Brieuc_Netatmo » 04 Oct 2018, 11:50

Hi all,
Thank you for this suggestion.
It will be discussed internally. Our current priority is to optimize the Valves room temperature estimation performance.
Have a nice day!
Brieuc - Netatmo Team

basil
Posts: 50
Joined: 05 Apr 2018, 19:21

Re: Suggestion: use Netatmo Weather Station temperatures

Post by basil » 04 Oct 2018, 17:39

Thanks for the reply Brieuc. Good to hear about developments.

tuxbox
Posts: 45
Joined: 07 Oct 2014, 08:45

Re: Suggestion: use Netatmo Weather Station temperatures

Post by tuxbox » 05 Oct 2018, 08:04

Yes, thanks for your feedback Brieuc. Very good to hear there is still development done.

I just really need to emphasize how important it would be to get good temperature readings.
At the moment this is - sorry, but in my case(s .. with seven valves) - horrible.
I'd need to correct offsets nearly every hour. Sometimes only slight, sometimes with real
big differences.
Getting the option to use better sensor readings e.g. from weather station indoor modules
is nearly a must in my opinion. Otherwise this system will be very huge step backwards from my old one
(from eq3 MAX heatingthermostats with additional wall thermostats which gave very good temperature readings).

I just changed my whole home setup a few days ago from the eq3 MAX to netatmo valves and
am a bit frustrated.
Not only the firmware update process is a mess, but what matters most .. operation of the heaters ..
is a mess in comparison. Mainly due to false (to much off) temperature readings of the valves.

So, really, please please please do something so we get better temperature readings.

Thanks,
Frank

tuxbox
Posts: 45
Joined: 07 Oct 2014, 08:45

Re: Suggestion: use Netatmo Weather Station temperatures

Post by tuxbox » 05 Nov 2018, 15:42

Brieuc_Netatmo wrote:Hi all,
Thank you for this suggestion.
It will be discussed internally. Our current priority is to optimize the Valves room temperature estimation performance.
Have a nice day!
Any news here? Just today i had to already correct valve offsets over a dozen times already. Otherwise i would have
wasted a lot of energy without need...
I even would be very grateful for a way to directly set the offset via the dev api myself. But currently i spent a lot of
time comparing and correcting those false totally false readings.
Please, i find this much more disturbing than open window detection. Without a relyable temperature reading the valves don't make
much sense at all.

tuxbox
Posts: 45
Joined: 07 Oct 2014, 08:45

Re: Suggestion: use Netatmo Weather Station temperatures

Post by tuxbox » 06 Nov 2018, 10:20

Same today. Valve in sleeping room reported above 29 degree (while it only had 21). Corrected offset.. of course an hour later it thought temp would have
fell below 20 degree (while it hadn't) and started heating according to plan, but of course needless. So again, correcting temp offset. This goes every few hours...
Sooner or later this seems to get a full time job..

Tommaso Florino
Posts: 41
Joined: 19 Jan 2018, 17:48

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Tommaso Florino » 12 Dec 2018, 22:56

+1
recently valve temperature readings (and new True Temperature function) are not reliable. It is now really a MUST that valve temperature reading can be "controlled" by weather station.

lolodunord
Posts: 9
Joined: 13 Feb 2017, 19:36

Re: Suggestion: use Netatmo Weather Station temperatures

Post by lolodunord » 13 Dec 2018, 06:13

+1

mooncusz
Posts: 11
Joined: 09 Mar 2018, 18:16

Re: Suggestion: use Netatmo Weather Station temperatures

Post by mooncusz » 13 Dec 2018, 18:48

+11111111111 :-)

Post Reply

Return to “General questions”