Suggestion: use Netatmo Weather Station temperatures

digi303
Posts: 12
Joined: 10 Dec 2018, 09:37

Re: Suggestion: use Netatmo Weather Station temperatures

Post by digi303 » 14 Dec 2018, 10:13

+1 of course

Roland_RS4
Posts: 23
Joined: 06 Jun 2017, 22:15

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Roland_RS4 » 16 Dec 2018, 20:51

This feature would solve my problems with this valves even the non existing open window detection in my bed room! Here an example: we have an oven to heat with wood in living room. If the temperature on valve would be reliable it would not heat. I always have to se it down manually when I heat. See screenshots room "Wohnzimmer" The difference i even cannot set with True Temp feature because its changing all the time. If the weather station sensor would be used to control the heating i have no problem here!
Screenshot_20181216-204402_Netatmo.jpg
Screenshot_20181216-204402_Netatmo.jpg
Attachments
Screenshot_20181216-204412_Energy.jpg
Thermostat v71
Valves v73
Relais v197

vojta66
Posts: 295
Joined: 21 Jan 2016, 11:56
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by vojta66 » 16 Dec 2018, 20:59

Exactly.....I have the same problems....and hundreds of other users.....Netatmo please listen
1Welcome(v433), 9 tags (v57), 1Smart Smoke (v108),1Smart Siren (v107)
1 Weather Station(v162), Outdoor module (48),Rain Gauge(v11) Wind Gauge(v24),3 Indoor Modules (v46)
1Thermostat(v72+relay 2nd generation (v210) + 5Valves (v81)
2Presence cameras(v163)

Tommaso Florino
Posts: 48
Joined: 19 Jan 2018, 17:48

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Tommaso Florino » 16 Dec 2018, 21:28

even if weather station could monitor only 4 rooms...

Roland_RS4
Posts: 23
Joined: 06 Jun 2017, 22:15

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Roland_RS4 » 16 Dec 2018, 22:20

Thats the next question : i did not search the whole forum yet. Why is the indoor sensor limited to 3?
Thermostat v71
Valves v73
Relais v197

stanikuz
Posts: 74
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by stanikuz » 16 Dec 2018, 22:34

Tommaso Florino wrote:even if weather station could monitor only 4 rooms...
You are right. However, the same integration could be with Healthy Home Coach too, so it could resolve this limitation.
Stan Kuznetsov
Weather: 2x Weather Stations + 6x Indoor Modules + 2x Rain + 2x Wind Gauges + 1x Home Coach
Security: 2x Welcome + 2x Presence Cameras + 3x Smoke Alarms + 3x Door/Window Sensors
Energy: 4x Smart Valves with Relay + 1x Thermostat with Relay

vojta66
Posts: 295
Joined: 21 Jan 2016, 11:56
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by vojta66 » 18 Dec 2018, 13:51

There are so many questions asked for such a long time.....and never getting any answer from Netatmo......I do not know if they really continue developement or simply they abandon it.....?
1Welcome(v433), 9 tags (v57), 1Smart Smoke (v108),1Smart Siren (v107)
1 Weather Station(v162), Outdoor module (48),Rain Gauge(v11) Wind Gauge(v24),3 Indoor Modules (v46)
1Thermostat(v72+relay 2nd generation (v210) + 5Valves (v81)
2Presence cameras(v163)

Brieuc_Netatmo
Posts: 2941
Joined: 02 Jan 2014, 11:20

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Brieuc_Netatmo » 18 Dec 2018, 15:24

Hi all,
Just to kindly remind you: we read all posts published here, so please be assured your suggestions are taken into account.
However on this topic in particular, there is no specific news to share since my last comment.
Have a nice day!
Brieuc - Netatmo Team

Mrsv
Posts: 22
Joined: 23 Nov 2018, 21:56

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Mrsv » 18 Dec 2018, 16:05

Thanks for your reply Brieuc. The possibility of control room temperature with a thermostat (a simple thermometer ) connected to valves it would be a fantastic solution. For example it's a possibility with another similar system, the honeywell evohome. I'm not a troll, only an example to make a fantastic product better!

Tommaso Florino
Posts: 48
Joined: 19 Jan 2018, 17:48

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Tommaso Florino » 18 Dec 2018, 18:30

Brieuc_Netatmo wrote:Hi all,
Just to kindly remind you: we read all posts published here, so please be assured your suggestions are taken into account.
However on this topic in particular, there is no specific news to share since my last comment.
Have a nice day!
.
ok Brieuc, thank you for the update. So , about your last comment : did you managed to improve valve temperature reading? because since lasr firmware update it is worst then before.
thank you
tommaso florino

Post Reply

Return to “General questions”