Suggestion: use Netatmo Weather Station temperatures

digi303
Posts: 12
Joined: 10 Dec 2018, 09:37

Re: Suggestion: use Netatmo Weather Station temperatures

Post by digi303 »

+1 of course
Roland_RS4
Posts: 29
Joined: 06 Jun 2017, 22:15

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Roland_RS4 »

This feature would solve my problems with this valves even the non existing open window detection in my bed room! Here an example: we have an oven to heat with wood in living room. If the temperature on valve would be reliable it would not heat. I always have to se it down manually when I heat. See screenshots room "Wohnzimmer" The difference i even cannot set with True Temp feature because its changing all the time. If the weather station sensor would be used to control the heating i have no problem here!
Screenshot_20181216-204402_Netatmo.jpg
Screenshot_20181216-204402_Netatmo.jpg
Attachments
Screenshot_20181216-204412_Energy.jpg
Thermostat v75
Valves v85
Relais v222
vojta66
Posts: 369
Joined: 21 Jan 2016, 11:56
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by vojta66 »

Exactly.....I have the same problems....and hundreds of other users.....Netatmo please listen
1Welcome(512), 9 tags (v58), 1Smart Smoke (v108),1Smart Siren (v209)
1 Weather Station(v181), Outdoor module (50),Rain Gauge(v12),Wind Gauge(v25),3 Indoor Modules (v51)
1Thermostat(v75+relay 2nd generation v222 + 5Valves (v85)
2Presence cameras(320)
Tommaso Florino
Posts: 87
Joined: 19 Jan 2018, 17:48

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Tommaso Florino »

even if weather station could monitor only 4 rooms...
Roland_RS4
Posts: 29
Joined: 06 Jun 2017, 22:15

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Roland_RS4 »

Thats the next question : i did not search the whole forum yet. Why is the indoor sensor limited to 3?
Thermostat v75
Valves v85
Relais v222
stanikuz
Posts: 107
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by stanikuz »

Tommaso Florino wrote:even if weather station could monitor only 4 rooms...
You are right. However, the same integration could be with Healthy Home Coach too, so it could resolve this limitation.
Stan Kuznetsov
Weather: 3x Stations + 7x Indoor Modules + 3x Rain + 2x Wind + 2x Home Coach
Security: 3x Welcome + 2x Presence + 3x Smoke Alarms + 1x CO2 Alarm + 20x Door/Window Sensors + 1x Doorbell
Energy: 7x Valves + 1x Thermostat with 3x Relays
vojta66
Posts: 369
Joined: 21 Jan 2016, 11:56
Contact:

Re: Suggestion: use Netatmo Weather Station temperatures

Post by vojta66 »

There are so many questions asked for such a long time.....and never getting any answer from Netatmo......I do not know if they really continue developement or simply they abandon it.....?
1Welcome(512), 9 tags (v58), 1Smart Smoke (v108),1Smart Siren (v209)
1 Weather Station(v181), Outdoor module (50),Rain Gauge(v12),Wind Gauge(v25),3 Indoor Modules (v51)
1Thermostat(v75+relay 2nd generation v222 + 5Valves (v85)
2Presence cameras(320)
Brieuc_Netatmo
Posts: 3088
Joined: 02 Jan 2014, 11:20

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Brieuc_Netatmo »

Hi all,
Just to kindly remind you: we read all posts published here, so please be assured your suggestions are taken into account.
However on this topic in particular, there is no specific news to share since my last comment.
Have a nice day!
Brieuc - Netatmo Team
Mrsv
Posts: 32
Joined: 23 Nov 2018, 21:56

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Mrsv »

Thanks for your reply Brieuc. The possibility of control room temperature with a thermostat (a simple thermometer ) connected to valves it would be a fantastic solution. For example it's a possibility with another similar system, the honeywell evohome. I'm not a troll, only an example to make a fantastic product better!
Tommaso Florino
Posts: 87
Joined: 19 Jan 2018, 17:48

Re: Suggestion: use Netatmo Weather Station temperatures

Post by Tommaso Florino »

Brieuc_Netatmo wrote:Hi all,
Just to kindly remind you: we read all posts published here, so please be assured your suggestions are taken into account.
However on this topic in particular, there is no specific news to share since my last comment.
Have a nice day!
.
ok Brieuc, thank you for the update. So , about your last comment : did you managed to improve valve temperature reading? because since lasr firmware update it is worst then before.
thank you
tommaso florino
Post Reply

Return to “General questions”