Netatmo Valves

Post Reply
Borja190898
Posts: 8
Joined: 17 May 2018, 16:07

Netatmo Valves

Post by Borja190898 » 09 Nov 2018, 09:36

Hi,
Can I swith off valves in a specific time? In example, if I want to at 9pm the radiator stop works swith off valve of the radiator and at 8am works again. Can I do that? Thanks! I am insterested on buy it

achlouve
Posts: 19
Joined: 19 Sep 2018, 14:37

Re: Netatmo Valves

Post by achlouve » 09 Nov 2018, 09:43

Hi,

Yes of course you can. This is the whole point of the smart valves. If you set a target temperature which is lower than the current one in the room then the valve will remain closed and the radiator will be cold. Please note that you will need the Netatmo thermostat. The valves don't work independently.

Best,
A

Borja190898
Posts: 8
Joined: 17 May 2018, 16:07

Re: Netatmo Valves

Post by Borja190898 » 09 Nov 2018, 09:51

Okey, Thanks! What its the minimum temperatura you can set on valves? Whatt its the maximum of times you can program on valves, por example, can I put 8 am valve at 20º, 11 am 23º, 15 pm 20º, etc etc whats is the maximum?
Thanks a lot again!

Borja190898
Posts: 8
Joined: 17 May 2018, 16:07

Re: Netatmo Valves

Post by Borja190898 » 09 Nov 2018, 09:53

Sorry again, why I need thermostat Netatmo??? The rele of the valves can not works alone with thermostat? Why its necesary?

achlouve
Posts: 19
Joined: 19 Sep 2018, 14:37

Re: Netatmo Valves

Post by achlouve » 09 Nov 2018, 11:53

Minimum temperature is 7 degrees celcius. I think you can set as many time slots as you want.

I don't think the valves work without the Netatmo thermostat+Relay. The valves need to connect to the Netatmo Relay. Also there are two operating modes for the valves: "Comfort priority" and "Eco priority" that trigger and not trigger the relay respectively.

Basically it's a system and they don't work independently.

A

Borja190898
Posts: 8
Joined: 17 May 2018, 16:07

Re: Netatmo Valves

Post by Borja190898 » 09 Nov 2018, 12:18

And how I know if thermostat is compatible with my boiler? Thanks!

achlouve
Posts: 19
Joined: 19 Sep 2018, 14:37

Re: Netatmo Valves

Post by achlouve » 09 Nov 2018, 14:08


Post Reply

Return to “General questions”