[Question] Firmware update status

Post Reply
massyc
Posts: 3
Joined: 19 Nov 2018, 22:46

[Question] Firmware update status

Post by massyc » 19 Nov 2018, 22:52

I just installed two valves and I would set the "True temperature" for them, but when I try to do that the app says that it isn't possible to set the temperature because the software of one of my valves is not up to date.
How can I check the valves' firmware update status?
Is it possible to force the update?

The current valves firmware version is 48.

Thanks!

mhaga
Posts: 48
Joined: 07 Dec 2017, 10:08

Re: [Question] Firmware update status

Post by mhaga » 20 Nov 2018, 12:55

Hi,

Just leave the system on and connected for 24h and it will be updated by itself. It takes some time, so be patient.
You can also plug the relay to you computer by USB and use a update tool, but you still have to wait for the valves to update.
I will recommend just leaving it on and connected for a day and see if it get updated by itself.

BR
/mhaga

massyc
Posts: 3
Joined: 19 Nov 2018, 22:46

Re: [Question] Firmware update status

Post by massyc » 20 Nov 2018, 18:48

Thanks,
the valves has been updated today, now they run both the firmware 71. :-)

Post Reply

Return to “General questions”