Valves with no thermostat settings

Post Reply
Blusa
Posts: 6
Joined: 29 Nov 2018, 18:31

Valves with no thermostat settings

Post by Blusa » 29 Nov 2018, 18:49

Hi everyone, this is my very first post, so please forgive me if my question seems to be silly.

Is it possible to set a heating system using valves with a relay but with no thermostat? (I have a boiler, I know it's possible with central heating)

Thanks

achlouve
Posts: 19
Joined: 19 Sep 2018, 14:37

Re: Valves with no thermostat settings

Post by achlouve » 30 Nov 2018, 10:20

Hi,

I think you can.

https://shop.netatmo.com/eur_en/starter-pack.html

Best,
Antonis

Blusa
Posts: 6
Joined: 29 Nov 2018, 18:31

Re: Valves with no thermostat settings

Post by Blusa » 30 Nov 2018, 11:52

Hi achlouve, and thanks for the answer.

I'm not sure if that starter pack is only for central heating or is able to trigger a boiler.
What do you think?

mooncusz
Posts: 11
Joined: 09 Mar 2018, 18:16

Re: Valves with no thermostat settings

Post by mooncusz » 30 Nov 2018, 11:53

I not recommend to buy valves. They need to fix temperature stuck first...

Blusa
Posts: 6
Joined: 29 Nov 2018, 18:31

Re: Valves with no thermostat settings

Post by Blusa » 30 Nov 2018, 12:15

Yeah, I am following the issue in the thread below but i've just bought 5 valves on Amazon.
In case of so big problems i'm going to give them back as soon as i can.

I was just curious if they can work with a boiler but without the thermostat

Thanks

EDIT: Rephrasing the question, why should i need a thermostat if my valves are able to trigger the boiler by themselves? In that case thermostat could only be a problem :roll:

schmaker
Posts: 48
Joined: 11 Oct 2018, 18:04

Re: Valves with no thermostat settings

Post by schmaker » 30 Nov 2018, 22:36

Because valve kit relay isnt able to trigger boiler.

Blusa
Posts: 6
Joined: 29 Nov 2018, 18:31

Re: Valves with no thermostat settings

Post by Blusa » 01 Dec 2018, 16:21

Ok, thanks, that's what I suspected. Is it the same with the last firmware update and confort mode?

schmaker
Posts: 48
Joined: 11 Oct 2018, 18:04

Re: Valves with no thermostat settings

Post by schmaker » 03 Dec 2018, 12:30

At least from what i heard the smart valves kit does not include physical pins to trigger boiler on their relay, so it cant be fixed with firmware update.

Blusa
Posts: 6
Joined: 29 Nov 2018, 18:31

Re: Valves with no thermostat settings

Post by Blusa » 03 Dec 2018, 16:10

Great, thank you very much

tomschwarz
Posts: 7
Joined: 27 Nov 2018, 21:29

Re: Valves with no thermostat settings

Post by tomschwarz » 10 Jan 2019, 01:34

Right. I understand. The way the system works best is with the thermostat (which seems to be required) is set to a very low temperature. Then the beauty of the system, even though you have only one boiler, any room can turn it on based on the temperature at the smart valve. And then that hot water from the boiler will only flow to the room with the valve(s) that requested the heat because all the other smart valves are turned off.

Post Reply

Return to “General questions”