Suggestion: room based heating, not thermostat heating

cagliostro
Posts: 10
Joined: 07 Nov 2017, 10:09

Re: Suggestion: room based heating, not thermostat heating

Post by cagliostro » 13 Nov 2017, 10:30

I am in this situation, the valves have fw 47, the relay and the thermostat have no upgrades.
Attachments
0A5DD3E7-7BCE-45A7-A7F0-07C75BD63AAC.jpeg

cagliostro
Posts: 10
Joined: 07 Nov 2017, 10:09

Re: Suggestion: room based heating, not thermostat heating

Post by cagliostro » 13 Nov 2017, 13:43

Thank you

valentinocolella
Posts: 7
Joined: 09 Nov 2017, 21:49

Re: Suggestion: room based heating, not thermostat heating

Post by valentinocolella » 13 Nov 2017, 13:49

Hi Brieuc, I have not received the update yet.

Thank you

valentinocolella wrote:Hi Brieuc,
could I also have the beta upgrade?
These are mine:

Thermostat 04:00:00:07:fe:7a ver 61
Relay 70:ee:50:07:e1:04 ver 152
Valve 09:00:00:00:21:bd ver 41
Valve 09:00:00:00:24:4f ver 43
Valve 09:00:00:00:74:f7 ver 43
Valve 09:00:00:00:76:d9 ver 43
Valve 09:00:00:00:8a:48 ver 41

Thank you

MarcoGT
Posts: 30
Joined: 18 Oct 2017, 08:34

Re: Suggestion: room based heating, not thermostat heating

Post by MarcoGT » 13 Nov 2017, 15:22

Well, me neither.
They do not release update upon request

Bhobina
Posts: 7
Joined: 11 Feb 2017, 19:28

Re: Suggestion: room based heating, not thermostat heating

Post by Bhobina » 13 Nov 2017, 22:26

Hi Brieuc
As beta tester I try to report some little anomaly.
First of all, I have these current version of FW: Thermostat V64, Relay V159, Valve v47

Image

As you can see in the graphic in a room equipped with valve the temperature control reaction is really too slow. i know that the valve it is not a thermostat, but actually shut off the heater really too late. I programmed temp for 23°, but raised to 25,5° before slope down.



Image

In this second graph you see a three different rooms graph. The first two is valve controlled heater room, the third is a thermostat room (with valve too on heater). As you can see, the behavior of the temp is correct in the thermostat room (salotto), in the other two rooms, the heater some time is hot, without need it. The ambience temperature is ever over the programmed temp, but at the 11:00 when boiler is powered on by thermostat, the temperature raise in the other room. This is a really strange behavior. Thermostat tell to valve to open without reason.

Tell me if you need other info to try to catch the problem.

Bye

Davide

risodv
Posts: 46
Joined: 31 Oct 2017, 21:05

Re: Suggestion: room based heating, not thermostat heating

Post by risodv » 14 Nov 2017, 00:22

I can confirm same problem with my valves as Bhobina have. Valve’s callibration temporary solves “not closed valve” issue.

Sn00thy
Posts: 8
Joined: 09 Oct 2017, 12:24

Re: Suggestion: room based heating, not thermostat heating

Post by Sn00thy » 14 Nov 2017, 07:58

Hi Brieuc!

Can you force an update for my system? underfloor heating in the living room where the thermostat is messes up the whole system.

Relay fw 150:
70:ee:50:0e:05:ac

Thermostat fw 59:
04:00:00:0c:89:2a

Valves fw 41:
09:00:00:00:a6:8b
09:00:00:00:a9:62
09:00:00:00:97:b0
09:00:00:00:96:da
09:00:00:00:97:14

Thank you in advance!
Peter

Brieuc_Netatmo
Posts: 2938
Joined: 02 Jan 2014, 11:20

Re: Suggestion: room based heating, not thermostat heating

Post by Brieuc_Netatmo » 14 Nov 2017, 09:58

Bhobina wrote:Hi Brieuc
As beta tester I try to report some little anomaly.
First of all, I have these current version of FW: Thermostat V64, Relay V159, Valve v47

Image

As you can see in the graphic in a room equipped with valve the temperature control reaction is really too slow. i know that the valve it is not a thermostat, but actually shut off the heater really too late. I programmed temp for 23°, but raised to 25,5° before slope down.



Image

In this second graph you see a three different rooms graph. The first two is valve controlled heater room, the third is a thermostat room (with valve too on heater). As you can see, the behavior of the temp is correct in the thermostat room (salotto), in the other two rooms, the heater some time is hot, without need it. The ambience temperature is ever over the programmed temp, but at the 11:00 when boiler is powered on by thermostat, the temperature raise in the other room. This is a really strange behavior. Thermostat tell to valve to open without reason.

Tell me if you need other info to try to catch the problem.

Bye

Davide
Hi,
The gap will be reduced by PID, but I suggest that you reduce the temperature of the heating water if possible, or place the Thermostat away from a heating source (as it seems that the measured temperature increases very fast).
Now about the second graph, it can be explained by the spread of the heat in all the house, and also by the sun exposure? In any case, the Valves were not opened.
Brieuc - Netatmo Team

valentinocolella
Posts: 7
Joined: 09 Nov 2017, 21:49

Re: Suggestion: room based heating, not thermostat heating

Post by valentinocolella » 14 Nov 2017, 12:40

Hi Brieuc, how long will I have to wait for you to receive the beta upgrade on my relay?

Thank you

valentinocolella wrote:Hi Brieuc, I have not received the update yet.

Thank you

valentinocolella wrote:Hi Brieuc,
could I also have the beta upgrade?
These are mine:

Thermostat 04:00:00:07:fe:7a ver 61
Relay 70:ee:50:07:e1:04 ver 152
Valve 09:00:00:00:21:bd ver 41
Valve 09:00:00:00:24:4f ver 43
Valve 09:00:00:00:74:f7 ver 43
Valve 09:00:00:00:76:d9 ver 43
Valve 09:00:00:00:8a:48 ver 41

Thank you

Brieuc_Netatmo
Posts: 2938
Joined: 02 Jan 2014, 11:20

Re: Suggestion: room based heating, not thermostat heating

Post by Brieuc_Netatmo » 14 Nov 2017, 16:24

valentinocolella wrote:Hi Brieuc, how long will I have to wait for you to receive the beta upgrade on my relay?

Thank you

valentinocolella wrote:Hi Brieuc, I have not received the update yet.

Thank you

valentinocolella wrote:Hi Brieuc,
could I also have the beta upgrade?
These are mine:

Thermostat 04:00:00:07:fe:7a ver 61
Relay 70:ee:50:07:e1:04 ver 152
Valve 09:00:00:00:21:bd ver 41
Valve 09:00:00:00:24:4f ver 43
Valve 09:00:00:00:74:f7 ver 43
Valve 09:00:00:00:76:d9 ver 43
Valve 09:00:00:00:8a:48 ver 41

Thank you
Hi,
Please stop multi-posting! We're looking into it.
Brieuc - Netatmo Team

Locked

Return to “General questions”