iPhone Smart Valve App - use Netatmo Weather data

Post Reply
kralle001
Posts: 2
Joined: 10 Oct 2017, 16:41

iPhone Smart Valve App - use Netatmo Weather data

Post by kralle001 » 10 Oct 2017, 16:47

Hi,

My setup is this:
3 Smart Valves + 1 relay
Weather station + rain + wind modules

In my Smart Valve Netatmo App, the outdoor temperature is 0.0 degrees, while my Netatmo Weather stations reports 4.1 degrees.
Is there a way to have the Smart Valve App use the Weather Station temperature AND also display it in the app?

It was my understanding, that if you have the Netatmo Weather station, that the Netatmo Smart Valve app would use the data, or did I get this wrong?

Cheers, and thanks!
Kralle

Hakki
Posts: 346
Joined: 25 Nov 2013, 20:58

Re: iPhone Smart Valve App - use Netatmo Weather data

Post by Hakki » 10 Oct 2017, 17:52

This is correct.
Both have to be on the same wifi network for 2 weeks and on the same email account.
After that period, it should be available.

kralle001
Posts: 2
Joined: 10 Oct 2017, 16:41

Re: iPhone Smart Valve App - use Netatmo Weather data

Post by kralle001 » 10 Oct 2017, 20:11

Excellent, I need to have patience then :)

Post Reply

Return to “General questions”