Valve temperature stuck

mooncusz
Posts: 13
Joined: 09 Mar 2018, 18:16

Re: Valve temperature stuck

Post by mooncusz »

This is example, how it works.

energy.png
- around 12:00, windows are opened to change air in the room, temperature decreased.
- then temperature is stucked
- at 17:00, boiler is on for a longer time, indoor temperature measured by valve is 19.8 celsius degrees

weather.png
- at 17:00 is actually 25.3 calsius degrees !!!!

now, it helps just to remove batteries, actual temperature measured by valve is corrected

PLEASE, FIX IT!!!
Attachments
weather.png
energy.png
Tiuri
Posts: 56
Joined: 29 May 2013, 06:28

Re: Valve temperature stuck

Post by Tiuri »

valerio wrote:All my valves randomly remain opened and let the room overheat and become a sauna. Support has stopped responding, I am demanding a full refund as the valves are non working and completely useless.

Has anyone been able to get a refund?
Same here. Support are useless and completely ignore valid proof (screenshots of valves heating when they were switched off).

I really wish I could get a refund!! I've taken to warning everyone about Netatmo, on every tech site
Roland_RS4
Posts: 29
Joined: 06 Jun 2017, 22:15

Re: Valve temperature stuck

Post by Roland_RS4 »

If we mention Brieuc_Netatmo in the this forum/posts maybe they take a proper look into it again. How that works? Can that someone do?

Then if they find a solution its ok, or we really need to get together and try to "contrain" them to get a refund. Like this this valves for me are useless:
- Missing open window detection (for me since March 2018 when i bought them)
- temperature stuck after opening window
- showing empty batteries after short time after new full batteries put in
- due to this faults NO saving of energy; on the contrary overheated rooms with more expenses

This are major "defects" and not that what the box promises
Thermostat v75
Valves v85
Relais v222
mooncusz
Posts: 13
Joined: 09 Mar 2018, 18:16

Re: Valve temperature stuck

Post by mooncusz »

I spent lot of time with support engineer during last winter, trying to solve this problem. Support engineer = just forwarder to developers. No progress. Absolutely waste of time.

I like products like netatmo wather station with all peripherals , also thermostat is good product. But valves need improvements! I;m like a fool, every night, after changing air in the rooms before sleeping, I must remove batteries from valves to prevent sauna during night.

Brieuc -> is it normal? Whats your opinion?
Roland_RS4
Posts: 29
Joined: 06 Jun 2017, 22:15

Re: Valve temperature stuck

Post by Roland_RS4 »

Is there any news on this?
My wife is killing me soon with this. We have over and over again the same problem. Nothing on this valves is smart so far.
I like the idea, i like the website and the App, but its not working! I spend like this much more on heating, then it actually should bring.
This open-windows-detection was already written on the box, when I bought it a year ago and STILL not handling it correctly.
When i remove batteries and put it back, then its correct, so this software cannot be fixed finally??

Today again, heating all day long at 100% till i removed batteries.
Anmerkung 2019-02-05 191910.jpg
Thermostat v75
Valves v85
Relais v222
Tommaso Florino
Posts: 87
Joined: 19 Jan 2018, 17:48

Re: Valve temperature stuck

Post by Tommaso Florino »

always the same problem returning perudically :?
Attachments
Screenshot_20200116-220332.jpeg
Screenshot_20200116-220332.jpeg (311.67 KiB) Viewed 2442 times
Screenshot_20200116-220340.jpeg
Screenshot_20200116-220340.jpeg (302.51 KiB) Viewed 2442 times
Roland_RS4
Posts: 29
Joined: 06 Jun 2017, 22:15

Re: Valve temperature stuck

Post by Roland_RS4 »

Since the last update to version v203 and later to v210 i have to say, that it was not a problem anymore. Sometimes it takes a while till it gets the temperature again, but its not heating all day at 100% as it used to. I think the Open-Window-Detection brought something.
2020-01-17 08_18_33-Netatmo.png
2020-01-17 08_18_33-Netatmo.png (7.3 KiB) Viewed 2440 times
Thermostat v75
Valves v85
Relais v222
Jouidan
Posts: 2
Joined: 17 Jan 2020, 10:45

Re: Valve temperature stuck

Post by Jouidan »

I have exactly the same issue that is coming back and back. I have to remove the bateries from valve and than the temperatur is corrected - very annoying. Real temperature goes very high - there is like in sauna in the room. Sometimes it happens once a week, sometimes it takes 2-3 weeks, but it is repeating. Actual picture from today morning attached. Usually it takes 30-40 minutes to heat the room to 21,5 degrees - small bedroom. Today the valve measured temperature is not really changing even if the heating is runing. Normal behaviour is on the second picture - living room example. We have central heating system so there is always hot water available. Any solution for this problem ?
Attachments
254490B9-37B0-4928-A1CA-52B856D04341.jpeg
254490B9-37B0-4928-A1CA-52B856D04341.jpeg (360.32 KiB) Viewed 2433 times
8E788D02-AA46-438A-97B3-5AB0AAD96C83.jpeg
8E788D02-AA46-438A-97B3-5AB0AAD96C83.jpeg (332.82 KiB) Viewed 2433 times
kthemall
Posts: 82
Joined: 31 Oct 2016, 12:59

Re: Valve temperature stuck

Post by kthemall »

hi had the same problem yesterday. kids-room was ultra-hot, although it was set to 19 degrees Celsius. today i read the open window feature may help, i activated it today. will let you know if that helps.

thx tom
Tommaso Florino
Posts: 87
Joined: 19 Jan 2018, 17:48

Re: Valve temperature stuck

Post by Tommaso Florino »

I've the owd active and the problems exist
Post Reply

Return to “General questions”