Anemometer Update!
Re: Anemometer Update!
Same here false wind reading....also during heavy rain.....don't tell me that's a normal thing !!!! Does Netatmo comes with a solution for this ???????
- Attachments
-
- 1.JPG (40.35 KiB) Viewed 1776 times
Re: Anemometer Update!
Installed My Anemometer a couple of days ago and the readings are quite different from WeatherProHD readings.
Today Reading 6 mph WeatherProHD 15 mph Any Ideas?
Please post and email as new to the Forum and not sure of my way round it
Email Address Lawrencemcollins@aol.com
Many Thanks
Lawrence
Today Reading 6 mph WeatherProHD 15 mph Any Ideas?
Please post and email as new to the Forum and not sure of my way round it
Email Address Lawrencemcollins@aol.com
Many Thanks
Lawrence
Re: Anemometer Update!
Just Had mine fail with high readings during heavy rain, come on Netatmo this is unacceptable it is clearly not weather proof, very bad for an outdoor piece of tech!!!
- Attachments
-
- Screen Shot 2016-01-09 at 19.40.56.png (63.85 KiB) Viewed 1692 times
Re: Anemometer Update!
I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
Re: Anemometer Update!
I found batteries in each module last just over a year.Mapantz wrote:I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
Netatmo have my wind module for investigation at the moment.
-
- Posts: 3089
- Joined: 02 Jan 2014, 11:20
Re: Anemometer Update!
Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
Brieuc - Netatmo Team
Re: Anemometer Update!
No issues, except for 1 occasion.. but I don't mind getting the latest version: l004416Brieuc_Netatmo wrote:Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
Last edited by Hakki on 18 Jan 2016, 11:10, edited 1 time in total.
Re: Anemometer Update!
l003e6e
thank you!
thank you!
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee