Anemometer Update!

Tips, tricks and frequently asked questions
judaca
Posts: 4
Joined: 26 Aug 2014, 13:54

Re: Anemometer Update!

Post by judaca »

Same here false wind reading....also during heavy rain.....don't tell me that's a normal thing !!!! Does Netatmo comes with a solution for this ???????
Attachments
1.JPG
1.JPG (40.35 KiB) Viewed 1775 times
Lawrence
Posts: 1
Joined: 09 Jan 2016, 04:51

Re: Anemometer Update!

Post by Lawrence »

Installed My Anemometer a couple of days ago and the readings are quite different from WeatherProHD readings.
Today Reading 6 mph WeatherProHD 15 mph Any Ideas?
Please post and email as new to the Forum and not sure of my way round it
Email Address Lawrencemcollins@aol.com
Many Thanks
Lawrence
andpotti
Posts: 121
Joined: 12 Jun 2013, 11:48
Location: UK

Re: Anemometer Update!

Post by andpotti »

Just Had mine fail with high readings during heavy rain, come on Netatmo this is unacceptable it is clearly not weather proof, very bad for an outdoor piece of tech!!!
Attachments
Screen Shot 2016-01-09 at 19.40.56.png
Screen Shot 2016-01-09 at 19.40.56.png (63.85 KiB) Viewed 1691 times
Mapantz
Posts: 103
Joined: 14 Jan 2014, 13:11
Location: Wareham, Dorset - UK
Contact:

Re: Anemometer Update!

Post by Mapantz »

I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
Image
Image
gavinfabl
Posts: 51
Joined: 18 Oct 2013, 12:29

Re: Anemometer Update!

Post by gavinfabl »

Mapantz wrote:I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
I found batteries in each module last just over a year.

Netatmo have my wind module for investigation at the moment.
Brieuc_Netatmo
Posts: 3088
Joined: 02 Jan 2014, 11:20

Re: Anemometer Update!

Post by Brieuc_Netatmo »

Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
Brieuc - Netatmo Team
Nettetal
Posts: 37
Joined: 03 Jan 2016, 14:58

Re: Anemometer Update!

Post by Nettetal »

SN: l001de6
Hakki
Posts: 414
Joined: 25 Nov 2013, 20:58

Re: Anemometer Update!

Post by Hakki »

Brieuc_Netatmo wrote:Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
No issues, except for 1 occasion.. but I don't mind getting the latest version: l004416
Last edited by Hakki on 18 Jan 2016, 11:10, edited 1 time in total.
Dinosaure34
Posts: 18
Joined: 08 Dec 2015, 16:49

Re: Anemometer Update!

Post by Dinosaure34 »

Moi itou:
I0003ea
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Anemometer Update!

Post by GEORGzer »

l003e6e

thank you!
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “General questions”