Anemometer Update!

Tips, tricks and frequently asked questions
judaca
Posts: 2
Joined: 26 Aug 2014, 13:54

Re: Anemometer Update!

Post by judaca » 07 Jan 2016, 23:34

Same here false wind reading....also during heavy rain.....don't tell me that's a normal thing !!!! Does Netatmo comes with a solution for this ???????
Attachments
1.JPG
1.JPG (40.35 KiB) Viewed 520 times

Lawrence
Posts: 1
Joined: 09 Jan 2016, 04:51

Re: Anemometer Update!

Post by Lawrence » 09 Jan 2016, 13:34

Installed My Anemometer a couple of days ago and the readings are quite different from WeatherProHD readings.
Today Reading 6 mph WeatherProHD 15 mph Any Ideas?
Please post and email as new to the Forum and not sure of my way round it
Email Address Lawrencemcollins@aol.com
Many Thanks
Lawrence

andpotti
Posts: 121
Joined: 12 Jun 2013, 11:48
Location: UK

Re: Anemometer Update!

Post by andpotti » 09 Jan 2016, 20:44

Just Had mine fail with high readings during heavy rain, come on Netatmo this is unacceptable it is clearly not weather proof, very bad for an outdoor piece of tech!!!
Attachments
Screen Shot 2016-01-09 at 19.40.56.png
Screen Shot 2016-01-09 at 19.40.56.png (63.85 KiB) Viewed 436 times

Mapantz
Posts: 103
Joined: 14 Jan 2014, 13:11
Location: Wareham, Dorset - UK
Contact:

Re: Anemometer Update!

Post by Mapantz » 12 Jan 2016, 21:12

I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
Image
Image

gavinfabl
Posts: 51
Joined: 18 Oct 2013, 12:29

Re: Anemometer Update!

Post by gavinfabl » 12 Jan 2016, 22:30

Mapantz wrote:I can see me throwing my station away at this rate! I've only had my anemometer up a month, and the battery status is showing under half full. If this is correct, then there's an issue- i'm using lithium energizer batteries as well..
I found batteries in each module last just over a year.

Netatmo have my wind module for investigation at the moment.

Brieuc_Netatmo
Posts: 2948
Joined: 02 Jan 2014, 11:20

Re: Anemometer Update!

Post by Brieuc_Netatmo » 18 Jan 2016, 10:29

Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
Brieuc - Netatmo Team

Nettetal
Posts: 34
Joined: 03 Jan 2016, 14:58

Re: Anemometer Update!

Post by Nettetal » 18 Jan 2016, 10:55

SN: l001de6

Hakki
Posts: 352
Joined: 25 Nov 2013, 20:58

Re: Anemometer Update!

Post by Hakki » 18 Jan 2016, 10:59

Brieuc_Netatmo wrote:Hello,
To anyone who has erroneous measures with the Wind Gauge, please share the serial number, I will force the update in latest v13 firmware.
No issues, except for 1 occasion.. but I don't mind getting the latest version: l004416
Last edited by Hakki on 18 Jan 2016, 11:10, edited 1 time in total.

Dinosaure34
Posts: 18
Joined: 08 Dec 2015, 16:49

Re: Anemometer Update!

Post by Dinosaure34 » 18 Jan 2016, 11:01

Moi itou:
I0003ea

GEORGzer
Posts: 1080
Joined: 14 Jan 2014, 18:14

Re: Anemometer Update!

Post by GEORGzer » 18 Jan 2016, 11:09

l003e6e

thank you!
Home:
Weather Station (3rd Generation + Rain Gauge, Wind Gauge, 3 additional Indoor Modules)
2 Valves + Relais (Starter Pack), 5 additional Valves

Office:
Thermostat + Relais (2nd Generation)
Healthy Home Coach
Smart Smoke Alarm

Post Reply

Return to “General questions”