Temperature manteinance

This forum provides technical help on how to set up Netatmo Thermostat Wifi connection.
Post Reply
Sauretti
Posts: 1
Joined: 15 Oct 2016, 11:22

Temperature manteinance

Post by Sauretti »

Hi all,

I am pretty happy with the Netatmo thermostat but I am having some issue to fix temperature.
My apartment is pretty cold and is very hard to keep it hot. Netatmo is doing a good job but with a problem.

Example: I set up temperature @ 21.5 deg, thermostat hit the temperature perfectly but then it stop to "work" for two hours.
8.00: star thermostat with house temperature @ 21.0
8.35: Netatmo Stop working with house temp @ 21.4 (perfect)
8.50: start again for 10-15 minutes and arrive at 21.5 (perfect)
Then it stays @21.5 for two hours and after thi,s sometimes, it also goes to 21.6 /21.7 (after two hours!!). So for three hours is not working and it says that temperature is fixed.
Thermo are cold and the house is pretty cold, and I think here is missing the advanced version (even if it is setted).

I d like to have a more on/off function in order to have the hose always at same temperature,
Outside is not very cold (8°-13°) but I just want to know your opinion on how to improve this.

Apartment very big with high ceiling.


Thanks in advance

Andrea
Schatzi
Posts: 10
Joined: 07 Feb 2018, 21:00

Re: Temperature manteinance

Post by Schatzi »

Hello! Did you solve the issue?
Post Reply

Return to “Thermostat Network Set-up”