Hi all,
is it possible to change place/font of desired and actual temperature?
As it is now, the desired temp is showed in BOLD, actual temp is displayed in outlined font.
From a distance, it's very easy to see the desired , but not the actual temp. Maybe I'm strange, but I'm more interested in actual temp, because I know what temp is wanted.
thx for your input
greetz
Visibility temperatures
Re: Visibility temperatures
I have the same objection. It should be a feature request: enable swapping outline and bold fonts for desired and actual temperature.
Re: Visibility temperatures
I would like to have this changed too. In dim lighting conditions it is impossible to read the display...
...but I might be wrong...
Re: Visibility temperatures
Today, I posted about the same request:
https://forum.netatmo.com/viewtopic.php?f=20&t=9385
I'm surprised that just a handful of users are interested on this feature.
https://forum.netatmo.com/viewtopic.php?f=20&t=9385
I'm surprised that just a handful of users are interested on this feature.
-
- Posts: 3
- Joined: 02 Feb 2018, 13:20
Re: Visibility temperatures
I agree and I'm interested too.
Any other "classic" thermostat display current temperature in a BIG format and setted temperature in small format.
I think, from user experince point of view, is more important to see this three informations:
- BIG format: current ambient temperature
- Small format: setted temperature (and if possible current schedule's start/stop time)
- Very small format: heating on/off ( a simple dot in bold/hollow format should be enough). Now I need to watch the relay to know this, but my relay is not visible from my room where is the thermostat installed
Thanks
Any other "classic" thermostat display current temperature in a BIG format and setted temperature in small format.
I think, from user experince point of view, is more important to see this three informations:
- BIG format: current ambient temperature
- Small format: setted temperature (and if possible current schedule's start/stop time)
- Very small format: heating on/off ( a simple dot in bold/hollow format should be enough). Now I need to watch the relay to know this, but my relay is not visible from my room where is the thermostat installed
Thanks
Re: Visibility temperatures
I have the same problem. Both temperatures should be bold.