New app (warm)temperature correction fail

Post Reply
max@mo
Posts: 8
Joined: 15 Dec 2017, 09:00

New app (warm)temperature correction fail

Post by max@mo »

The new app/web page showed a new option about the temperature correction, Cold and Warm values, but in my setup warm value doesn't work as expected.
Whatever the value I'll put in the "Warm" section , it'll no provide any "update" on the temperature showed by the valve.
Is it just a fault in my valve/setup ?
Thucydides
Posts: 7
Joined: 17 Dec 2017, 22:44

Re: New app (warm)temperature correction fail

Post by Thucydides »

Same problem here
1 relais : 161
1 thermostat : 64
6 vannes : 50
Brieuc_Netatmo
Posts: 3089
Joined: 02 Jan 2014, 11:20

Re: New app (warm)temperature correction fail

Post by Brieuc_Netatmo »

Hi,
Please note that the "warm radiator" setting can take up to 24H to be taken into account.
We will add a short sentence in the description to mention that, thank you for having reported this issue.
Brieuc - Netatmo Team
Wooze
Posts: 15
Joined: 23 Oct 2016, 18:22
Location: Austria

Re: New app (warm)temperature correction fail

Post by Wooze »

I would like to suggest the following on this subject.
Wouldn't it be possible to use the internal temperature from an existing internal temperature sensor of a netatmo weather station as the actual temperature for the valves?
I think an external temperature sensor further away from the radiator would make it much more accurate to measure the room temperature.
2Qt2beStr8
Posts: 30
Joined: 29 Oct 2017, 08:10

Re: New app (warm)temperature correction fail

Post by 2Qt2beStr8 »

+1
Relais: 70:ee:50:0e:97:fe
Weather Station Main Modul: 70:ee:50:6b:1d:9a
Fragiolo
Posts: 1
Joined: 14 Jan 2018, 15:40

Re: New app (warm)temperature correction fail

Post by Fragiolo »

I tried to setup the valves thermometer as shown on the netatmo weather station value, but it doesn’t follow accurately the sensor.. so it would be a good Idea sync the valve room sensor with the weather station sensor where provided in the room.
Post Reply

Return to “General questions”