Auto Adapt

Post Reply
Posts: 37
Joined: 20 Aug 2017, 16:00

Auto Adapt

Post by Cristi_XP » 16 May 2018, 15:46


I have my request for heat on 17:30, Comfort to 23 degrees.
When the Autoadapt starts to boiler to have the 23 degrees by 17:30, I am seeing the heating sign only for the thermostat, but not on the valves? Any ideea why is this?
Shouldn`t the valves also let the the heated water into the radiators to get to rooms hot by the 17:30?
For example, from 8Am in the morning i have the ECO scheduled till 17:30. With an hour before 17:30 or more than an hour, the heat should be on auto adapt to get the rooms to the wanted temperature till 17:30, but this only happens for the central thermostat, not for all the valves.
For example, the valve from the bathroom downstairs should start the heat also... because it is also on 22 degrees, not 23.

Any ideea how can I make this work? Why am I having this issue?

2018-05-16 16_44_36-Netatmo.png

Posts: 7
Joined: 17 Oct 2016, 08:48

Re: Auto Adapt

Post by marker » 04 Aug 2018, 07:14

I am having the same issue. The boiler start following the autodapt function of the thermostat but the valves remain close. Not really sure how the room should reach the temperature if the hot water doesn’t arrive to the radiators.

Posts: 2966
Joined: 02 Jan 2014, 11:20

Re: Auto Adapt

Post by Brieuc_Netatmo » 06 Aug 2018, 10:22

The Heating Prediction is not available yet for the Valves.
It will be available in the next few months.
In the meantime, we suggest to disable the Heating Prediction for your Thermostat, or adjust your weekly schedules of the Valves.
Thank you for your understanding.
Brieuc - Netatmo Team

Post Reply

Return to “General questions”