Advanced algorithms (PID and Heating Prediction) computation

Tips, tricks and frequently asked questions
pawelf1
Posts: 10
Joined: 16 Nov 2018, 08:22

Re: Advanced algorithms (PID and Heating Prediction) computa

Post by pawelf1 » 17 Nov 2018, 11:12

Will PID will work corectly when i have a boiler with external thermometer that depending on outside tempreture setups temp of heating water in my home?

Ex: 10 degress outside radiators are at 35 degress
-10 degress outside radiator are at 55 degress

pebbleridge13
Posts: 6
Joined: 17 Nov 2018, 19:14

Re: Advanced algorithms (PID and Heating Prediction) computa

Post by pebbleridge13 » 17 Nov 2018, 19:39

pawelf1 wrote:Will PID will work corectly when i have a boiler with external thermometer that depending on outside tempreture setups temp of heating water in my home?

Ex: 10 degress outside radiators are at 35 degress
-10 degress outside radiator are at 55 degress
Hi,

Your Boiler Outside Compensation Control will totally confuse the Netatmo PID and Heating Prediction calculations.

From my experience I suggest you disable your Outside Compensation as my Netatmo does a fantastic job of controlling the temperature and heating start times on it's own.

Regards,

Paul

stanikuz
Posts: 74
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Advanced algorithms (PID and Heating Prediction) computa

Post by stanikuz » 18 Nov 2018, 10:06

pawelf1 wrote:Will PID will work corectly when i have a boiler with external thermometer that depending on outside tempreture setups temp of heating water in my home?

Ex: 10 degress outside radiators are at 35 degress
-10 degress outside radiator are at 55 degress
As pebbleridge13 already said: you should turn off this boiler's feature. Or you can turn off Auto-Adapt function of Netatmo Energy ecosystem. Just look at last paragraph of this page:
https://www.netatmo.com/en-us/helpcente ... -i-do/69_A
Stan Kuznetsov
Weather: 2x Weather Stations + 6x Indoor Modules + 2x Rain + 2x Wind Gauges + 1x Home Coach
Security: 2x Welcome + 2x Presence Cameras + 3x Smoke Alarms + 3x Door/Window Sensors
Energy: 4x Smart Valves with Relay + 1x Thermostat with Relay

lottware
Posts: 3
Joined: 11 Oct 2019, 22:12

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by lottware » 27 Nov 2019, 09:46

Is this algorithm compatible/recommended can it be fine if a pellet stove is also used to heat?

sergeantd
Posts: 2
Joined: 10 Feb 2019, 07:24

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by sergeantd » 29 Nov 2019, 09:05

lottware wrote:
27 Nov 2019, 09:46
Is this algorithm compatible/recommended can it be fine if a pellet stove is also used to heat?
Last year I used to have a pellet stove as heating system with PID enabled. So I can tell that it was working properly, but for better results you have to use the “always on” function of your pellet stove so you will always have hot water waiting for your demand.

Post Reply

Return to “General questions”