Sins years my weather station works well.
This morning i have no data. Checked everything and all works fine ... only the app say's that the unit is shut-down. I tested the wifi ... the light go's green on the indoor ... updated everything, used the NetatmoWizard, changed the Wifi connection, and al is working .. only no connection with the indoor / outdoor in the app (iPhone, iPad ..) or on my iMac
PC to Indoor installation: OK
Battery Outdoor: OK
Wifi connection: OK - 100%
So when i test, re-install the unit .. all works well .. only the program's say that the indoor unit is not connected?!
What is wrong here?
Thanks
No reading - all works fine
Re: No reading - all works fine
Hello,
Same here!
Exactly the same, by the way...
Additionally the connection to an second Indoor-Sensor seems fine, but still no data!
Can someone explain? Any advices?
Thank you so much in advance!
Same here!
Exactly the same, by the way...
Additionally the connection to an second Indoor-Sensor seems fine, but still no data!
Can someone explain? Any advices?
Thank you so much in advance!
Re: No reading - all works fine
Exactly the same at my station, last update 8 hours ago and big module disconnected, but everythings works well
Re: No reading - all works fine
Server/s apparently down. Active thread on this here:
https://forum.netatmo.com/viewtopic.php?f=10&t=16216
https://forum.netatmo.com/viewtopic.php?f=10&t=16216
-
- Posts: 3098
- Joined: 02 Jan 2014, 11:20
Re: No reading - all works fine
Hello everyone,
We apologize for this inconvenience, our servers actually have some difficulties now.
Our engineers are focused on finding a solution for recovery as soon as possible.
Thank you for your understanding and your patience.
We apologize for this inconvenience, our servers actually have some difficulties now.
Our engineers are focused on finding a solution for recovery as soon as possible.
Thank you for your understanding and your patience.
Brieuc - Netatmo Team
Re: No reading - all works fine
Please advice when everything works fine again so we don't have to test it al day long.
Re: No reading - all works fine
It seems to be working again!
Re: No reading - all works fine
My weather station shows very high value for the moment. Its about the inside module.
Outside en the extra module works fine.
When i set my extra inside module it shows 25,5°C and 1m further the 'master' module shows 34,9°C !?!
Re-install is not solving the problem.
Whats on here?
Outside en the extra module works fine.
When i set my extra inside module it shows 25,5°C and 1m further the 'master' module shows 34,9°C !?!
Re-install is not solving the problem.
Whats on here?