Hi.
When I start the camera with a bell transformer, the small fuse always breaks. At the beginning the LED flashes green then the sound comes briefly and then the fuse is defective. The transformer makes 12V.
Please Help!!
Grtx. Doggie
Fuse always breaks
-
- Posts: 75
- Joined: 15 Jan 2020, 18:44
Re: Fuse always breaks
What amperage is the transformer?
It might be worth checking the actual voltage in the circuit with a voltmeter.
Also if you post pics of the installation (transformer, wiring, doorbell and anything else in circuit) someone might spot something!
It might be worth checking the actual voltage in the circuit with a voltmeter.
Also if you post pics of the installation (transformer, wiring, doorbell and anything else in circuit) someone might spot something!
Re: Fuse always breaks
It is a bell transformer doorbell Gong 8V 12V 24V / 8VA.
- Attachments
-
- 61VfMriA3yL._AC_SX679_.jpg (33.75 KiB) Viewed 1184 times
-
- Posts: 75
- Joined: 15 Jan 2020, 18:44
Re: Fuse always breaks
That transform should be ok.
Any pictures of the installation?
any details of your installation? ie what chime are you using and how have you wired the system?
The more details you can give the easier it will be for people to advise!
Any pictures of the installation?
any details of your installation? ie what chime are you using and how have you wired the system?
The more details you can give the easier it will be for people to advise!
Re: Fuse always breaks
I connect only the netamo to the transform...i try to use 12 and 24 V.
Re: Fuse always breaks
Those transformers are not suited for being wired directly to the Doorbell without a Chime or Chime-Module in between.
But Netatmo sells two types of transformers for Chime-free installations.
And since someone will ask: the key is that those transformers provide limited power at 12V DC, 330mA with 4w max.
But Netatmo sells two types of transformers for Chime-free installations.
And since someone will ask: the key is that those transformers provide limited power at 12V DC, 330mA with 4w max.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: Fuse always breaks
Hi.
I have bought the original Transformer.
Works fine now.
Grtx.
I have bought the original Transformer.
Works fine now.
Grtx.
Re: Fuse always breaks
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee