Hello
I have a thermostat and a valve
since a few days they are not accessible in Netatmo apps (relay cannot be joined …)
BUT everything works perfectly in Homekit.
Something happens with Netatmo cloud solutions?
I fear yes as I have the same issue with the Camera that is totally manageable in homekit but not in the netatmo app
relay cannot be accessed
-
- Posts: 3
- Joined: 05 Oct 2022, 16:59
Re: relay cannot be accessed
My relay has stopped workjng today … now way to gain any control.
Anyone else with rhis problem?
Anyone else with rhis problem?
Re: relay cannot be accessed
Everything is down at the moment.
https://helpcenter.netatmo.com/
https://twitter.com/NetatmoSupport
https://helpcenter.netatmo.com/
https://twitter.com/NetatmoSupport
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: relay cannot be accessed
Everything - even Netatmo staff (not replying, not communicating about ETA ...)
Also - webpage is also not working correctly - was trying to check in FAQ if my schedule will still work, or valves will be "stuck" on last known state ... if so, then who'll pay for additional hours on Comfort+?
Manual controls are not enough, since mine will last for 2h. Here also- if offline, then there should be possibility for manual unlimited setting so at least it won't be super hot or freezing cold at night!
When offline - system should still allow for offline app control but just "degrade" to a "dumb" hysteresis without Auto Adapt.
Also - webpage is also not working correctly - was trying to check in FAQ if my schedule will still work, or valves will be "stuck" on last known state ... if so, then who'll pay for additional hours on Comfort+?
Manual controls are not enough, since mine will last for 2h. Here also- if offline, then there should be possibility for manual unlimited setting so at least it won't be super hot or freezing cold at night!
When offline - system should still allow for offline app control but just "degrade" to a "dumb" hysteresis without Auto Adapt.
Re: relay cannot be accessed
Homekit access still works for me btw.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: relay cannot be accessed
And also this time FAQ loaded - it should follow Schedule even if Offline - that's something ... yet it'll still "respect" the manual boost time set in the app.
Too bad, that today I was measuring temp with external thermometer to set true temperature (was shuffling around the valves, adding new ones etc) - without that my bedroom will be 1*C too hot, and bathroom like 2*C too cold, but at least I'm not freezing.
Why smart home stuff is designed to relay that much on Online status ...
Will check HomeKit yet I'm unsure if I was setting it up ... probably not
EDIT:
HomeKit works, yet it doesn't allow me to set a time for certain boost like in the app - it just allowing me to not walk from radiator to radiator to make a manual boost. Not much.
Too bad, that today I was measuring temp with external thermometer to set true temperature (was shuffling around the valves, adding new ones etc) - without that my bedroom will be 1*C too hot, and bathroom like 2*C too cold, but at least I'm not freezing.
Why smart home stuff is designed to relay that much on Online status ...
Will check HomeKit yet I'm unsure if I was setting it up ... probably not
EDIT:
HomeKit works, yet it doesn't allow me to set a time for certain boost like in the app - it just allowing me to not walk from radiator to radiator to make a manual boost. Not much.
Re: relay cannot be accessed
Netatmo should at least implement re-follow/change the schedule in offline mode. This becomes very anoying last time. Cloud is down too often.
Re: relay cannot be accessed
They confirmed this on twitter:
https://twitter.com/NetatmoSupport/stat ... 2288771073
I was able to access everything again just now btw.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: relay cannot be accessed
Was able to - at least I tunned up RealTemp and it went offline again ... but now it seems to work, so fingers crossed.