Presence with 3.13.0 - generally OK! (and quick competitor review)

Tips, tricks and frequently asked questions
Owenlars
Posts: 60
Joined: 16 Jan 2017, 15:49

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by Owenlars »

I’m still on 13.10
riskymoth
Posts: 18
Joined: 14 Jul 2019, 19:40

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by riskymoth »

One of my two cameras has just updated to 3.16.1. The other is currently on 3.13.0.
viktor
Posts: 13
Joined: 04 Dec 2022, 14:00

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by viktor »

3.16.1 installed. looks good
chr_wi
Posts: 5
Joined: 25 May 2023, 19:52

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by chr_wi »

3.16.1 has been installed on my camera 10 days ago. After 10 hours the camera disconnected. This happened before 3.16.1. sometimes as well, but after the firmware update I am not successful any longer to reconnect the camera again. Power off 30+sec, rooter reboot, … all done, the QRcode for both Setup and Reset are getting ignored - the camera just does a flash every 10sec but 3 times max. Any idea?
viktor
Posts: 13
Joined: 04 Dec 2022, 14:00

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by viktor »

chr_wi wrote: 25 May 2023, 20:29 3.16.1 has been installed on my camera 10 days ago. After 10 hours the camera disconnected. This happened before 3.16.1. sometimes as well, but after the firmware update I am not successful any longer to reconnect the camera again. Power off 30+sec, rooter reboot, … all done, the QRcode for both Setup and Reset are getting ignored - the camera just does a flash every 10sec but 3 times max. Any idea?
new sd card
chr_wi
Posts: 5
Joined: 25 May 2023, 19:52

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by chr_wi »

viktor wrote: 26 May 2023, 14:57
chr_wi wrote: 25 May 2023, 20:29 3.16.1 has been installed on my camera 10 days ago. After 10 hours the camera disconnected. This happened before 3.16.1. sometimes as well, but after the firmware update I am not successful any longer to reconnect the camera again. Power off 30+sec, rooter reboot, … all done, the QRcode for both Setup and Reset are getting ignored - the camera just does a flash every 10sec but 3 times max. Any idea?
new sd card
Does not improve situation unfortunately
chr_wi
Posts: 5
Joined: 25 May 2023, 19:52

Re: Presence with 3.13.0 - generally OK! (and quick competitor review)

Post by chr_wi »

I did a full reset of the cam and reconfigured now everything.
Post Reply

Return to “General questions”