Use valves without relay or any connection

Post Reply
byenary
Posts: 1
Joined: 28 Jan 2023, 09:39

Use valves without relay or any connection

Post by byenary »

Hello,

Can I use netatmo valves without making any modification to my current installation.
So I have modulating junkers, it does not have opentherm so I would need to connect the standard thermostat and would lose the modulating capacities.
Is it possible to just install valves om my radiators and control them trough the app / homeassistant.
Okay I can't turn it on in a smart way but it would enable me to have control over the rooms.

Thx for advice
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Use valves without relay or any connection

Post by GEORGzer »

No because you can‘t set them up in the first place since they only communicate through the Relais with your device/network.
You can buy the Valve-Starter-Pack. That‘s 2 Valves and a Relais, but that one can‘t be hooked up to a boiler.

So if you want to control a boiler, it‘s Thermostat or bust 😋
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “General questions”