Hi
Could you please have a look at photo of an Vailant EcoTec boiler wiring with some markings. Can you advice on where I should connect the Netatmo relay?
Thanks
Vailant EcoTech/Netatmo wiring
-
- Posts: 3
- Joined: 31 Jan 2023, 12:48
Vailant EcoTech/Netatmo wiring
- Attachments
-
- Vailant EcoTec wiring.pdf
- (208.91 KiB) Downloaded 64 times
Re: Vailant EcoTech/Netatmo wiring
Connect die brown and blue wires to the „230V RT“ terminals and the black and grey wires to the „24V RT“ terminals.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
-
- Posts: 3
- Joined: 31 Jan 2023, 12:48
Re: Vailant EcoTech/Netatmo wiring
thanks very much @GEORGzer.
Re: Vailant EcoTech/Netatmo wiring
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
-
- Posts: 3
- Joined: 31 Jan 2023, 12:48
Re: Vailant EcoTech/Netatmo wiring
Hi @GEORGzer
Thanks for your help. The thermostat is now able to communicate with the boiler via the relay I.e, I am able to increase/reduce the set point.
I now have a different issue. The app isn't communicating with the relay. I installed the app but the phone is unable to initiate the green, blue or white light on the relay. Any tips on what to do? Thanks for your help
Praveen
Thanks for your help. The thermostat is now able to communicate with the boiler via the relay I.e, I am able to increase/reduce the set point.
I now have a different issue. The app isn't communicating with the relay. I installed the app but the phone is unable to initiate the green, blue or white light on the relay. Any tips on what to do? Thanks for your help
Praveen
Re: Vailant EcoTech/Netatmo wiring
Your Relais only has one LED, you should see it blinking when you power it on. The color tells you what kind of Thermostat/Relais you have.
Blue: 1st Gen. Thermostat
White 2nd Gen. Thermostat (Homekit compatible)
Green: OpenTherm Thermostat
For app/network troubleshooting, please create a topic in one of the dedicated forums.
Blue: 1st Gen. Thermostat
White 2nd Gen. Thermostat (Homekit compatible)
Green: OpenTherm Thermostat
For app/network troubleshooting, please create a topic in one of the dedicated forums.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee