Thermostat cannot find relay
-
- Posts: 1
- Joined: 11 Jul 2014, 00:21
Thermostat cannot find relay
Hello there, I received my new thermostat, and I followed the instructions correctly I think (replacing a wall-mounted Eberle thermostat), but no connection between the thermostat and the relay. Installed new firmware on the relay via USB, got it recognized in the web app etc., tried taking out the batteries from the thermostat for more than a minute, nothing works, I keep getting the two icons about searching for the relay.
I read in one of the French posts that this problem has been resolved for some only by replacing the thermostat with a new one. Please advise whether there is another solution or otherwise please advise how/where I can request a replacement thermostat. Thanks!
I read in one of the French posts that this problem has been resolved for some only by replacing the thermostat with a new one. Please advise whether there is another solution or otherwise please advise how/where I can request a replacement thermostat. Thanks!
-
- Posts: 3
- Joined: 06 Nov 2014, 10:50
Re: Thermostat cannot find relay
Hello!
I've been experiencing the same error: yesterday I received the thermostat and set it up connecting the relay directly to the boiler, following the "Installing your first thermostat" guide.
Everything went fine: the relay is active, connects to the internet, power on and off the boiler, but no connection to the thermostat so far.
Tried as well taking out the batteries and put the thermostat and the relay very close but after a while the thermostat goes on with the "!" mark on top meaning that it can connect to the relay.
The relay firmware version is 35 (as shown by the webapp).
Is there anything I can do to make it work or I must replace the thermostat?
Thanks!
I've been experiencing the same error: yesterday I received the thermostat and set it up connecting the relay directly to the boiler, following the "Installing your first thermostat" guide.
Everything went fine: the relay is active, connects to the internet, power on and off the boiler, but no connection to the thermostat so far.
Tried as well taking out the batteries and put the thermostat and the relay very close but after a while the thermostat goes on with the "!" mark on top meaning that it can connect to the relay.
The relay firmware version is 35 (as shown by the webapp).
Is there anything I can do to make it work or I must replace the thermostat?
Thanks!
-
- Posts: 3089
- Joined: 02 Jan 2014, 11:20
Re: Thermostat cannot find relay
@mauroverrocchio: Hello,
I will force an update of your Thermostat remotely, which will solve this communication issue.
Just be sure to properly power on the 2 modules, relay on an outlet or on its boiler adapter, put the batteries in the thermostat, and let the 2 modules close to each other. Connect the relay to your Wi-Fi network.
Once the relay has been updated, the Thermostat wil find it, and the relay will automatically update the Thermostat in the next 6 hours.
I will force an update of your Thermostat remotely, which will solve this communication issue.
Just be sure to properly power on the 2 modules, relay on an outlet or on its boiler adapter, put the batteries in the thermostat, and let the 2 modules close to each other. Connect the relay to your Wi-Fi network.
Once the relay has been updated, the Thermostat wil find it, and the relay will automatically update the Thermostat in the next 6 hours.
Brieuc - Netatmo Team
-
- Posts: 3
- Joined: 06 Nov 2014, 10:50
Re: Thermostat cannot find relay
Thank you Brieuc!
I'm at work right now, but if I recall correctly I left everything on at home and thermostat and relay are close to each other
Thanks again for the quick reply!
I'm at work right now, but if I recall correctly I left everything on at home and thermostat and relay are close to each other
Thanks again for the quick reply!
-
- Posts: 3
- Joined: 06 Nov 2014, 10:50
Re: Thermostat cannot find relay
Just checked and everything works fine!
Thanks so much!
Have a nice day
Thanks so much!
Have a nice day
Re: Thermostat cannot find relay
Hello *,
two days ago I connected the netatmo thermostat. despite several attempts , no connection between the thermostat and the relay is possible! Thermostat and relay are located next to each other.
two days ago I connected the netatmo thermostat. despite several attempts , no connection between the thermostat and the relay is possible! Thermostat and relay are located next to each other.
-
- Posts: 3089
- Joined: 02 Jan 2014, 11:20
Re: Thermostat cannot find relay
Hello thot,
Please connect your Thermostat and its relay to your Wi-Fi network, and let them powered on, I will fix this issue.
Please connect your Thermostat and its relay to your Wi-Fi network, and let them powered on, I will fix this issue.
Brieuc - Netatmo Team
Re: Thermostat cannot find relay
Hi Brieuc, I have the same problem of connection between the Thermostat and Rele.
Same as the others.
I already performed the de-association and re-association of the thermo through the sw as you described in another forum, but nothing.
Thermo and Rele are properly connected, so available to be updated via OTA.
Please could you update mine as well?
Thanks
Clelio
Same as the others.
I already performed the de-association and re-association of the thermo through the sw as you described in another forum, but nothing.
Thermo and Rele are properly connected, so available to be updated via OTA.
Please could you update mine as well?
Thanks
Clelio
Last edited by Clelio on 14 Nov 2014, 13:15, edited 2 times in total.
Re: Thermostat cannot find relay
As soon as I am at home ( about 17.00 clock ) I create the Internet connection . Thanks in advance.
-
- Posts: 3089
- Joined: 02 Jan 2014, 11:20
Re: Thermostat cannot find relay
Hello Clelio,
I've just forced the update on your Thermostat.
Thank you for your patience.
I've just forced the update on your Thermostat.
Thank you for your patience.
Brieuc - Netatmo Team